Chip firmware on xerox 3160 n cartridge.
Flashing the printer Xerox Phaser 3160B
The Phaser 3160B is another representative of the Xerox line of printers, replacing its predecessor, the Phaser 3125B printer. How can you describe the novelty in a nutshell? Without exaggeration, it can be called one of the most acceptable laser printers in the modern printing market, and not only because of the design and technical specifications, but also based on the traditional "price - quality" ratio. The Xerox Phaser 3160B was conceived as a publicly available personal or networked machine for small or medium-sized businesses that need responsiveness, professional display and layout modes for printed documents, maximum simplicity and intuitive operation. The task was solved with a bang: the Xerox Phaser 3160B prints at a pace of about 24 A4 pages per minute, is installed and brought into combat readiness with a few simple movements, compares favorably with an expanded set of various functions and modes, including the ability to print watermarks, complex overlays , postcards and brochures. In a word, this cute baby makes it possible to perform tasks of a very different nature and level of complexity. At the same time, the ergonomic design and minimal noise background allow you to relax "both the eye and the ear", concentrating as much as possible on the performance of their work duties.
In this regard, everything is clear, only the answer to the question remains unclear, how to achieve the same "grace" in providing a printer consumables? After all, the Xerox Phaser 3160B, although it is a monochrome printer, and, therefore, needs only one cartridge, can be quite expensive. Especially in case of intensive use. Some clarity is brought by such a service as refilling cartridges, however, to use its benefits, an additional flashing of the Xerox Phaser 3160B printer is required. Without this procedure, the protective mechanism will work, blocking the operation of the printer, as they say, “until the circumstances are clarified”, in our case, until a new original cartridge is installed in the device. To avoid this, you need to reset the counter of printed pages and remove the chip from the cartridge, and in order for the printer to accept a refilled cartridge without a chip, you need to replace its software, that is, reflash the Xerox Phaser 3160B. The path to savings, as we see, is complex and thorny, but not when the specialists of our company get down to business. In the latter case, the procedure for flashing the Xerox Phaser 3160B looks something like this: they brought the printer to our workshop, waited 15 minutes, and you're done!
They brought me a Xerox Phaser 3160n printer today, they said it was necessary to unlock it, this device fell into my hands for the first time.
I started to select firmware for it, read a lot, downloaded a lot, but it’s hard to kill someone else’s printer myself, a thing with extra hryvnia on the road is not lying around, but overcoming my fears, having gathered courage, I decided to try out the first firmware version v1.04.00.79f, download or (turbobit) or (letitbit). Since this Xerox is similar to Samsung, by analogy, I entered the service mode, launched dwn2580, the printer blinked, after waiting a few seconds (5-10), I unplugged the power cord and connected it again. Turning on the printer with the power button, he began to pretend as if it starts to take paper and stops immediately (and so 10 times - that's what he counted). I decided that I bought myself a new printer and was very upset (there were a lot of mats, I don’t describe them). Since there was nothing to lose, I decided to try the second firmware version v1.50.0062f, download it, did everything exactly like the previous time and the printer worked, now there was a lot of joy.
In general, I decided all the same to deal with these two firmware and figured it out. I won’t fool you anymore with stories about my experiences, I’ll get to the point.
1. Remove the chip from the cartridge.
BEFORE
AFTER
2. Connect the printer to the computer via USB cable(and only through it)
3. Press the "Resume" button and the "Power" button at the same time, keep these buttons pressed, connect the power cord to the printer, the red and green indicators light up. The printer is in service mode.
4. Open the folder with the firmware and run the dwn3160 file (if the firmware is v1.50.0062) or dwn2580 (if it is V1.04.00.79F), there will be such a visual accompaniment:
5. But this point is the most important, the point where I made a mistake and I ask you not to repeat it, when you launched the firmware file, the lights started flashing, your task is to wait until these lights go out and only the power button is on, I waited 88 seconds (plus minus 15 seconds for you to wait).
So, above I described the firmware procedure, and now about the firmware itself.
I did not like the firmware number 79, I explain why, because after the printer was flashed with this version, it began to be identified as Samsung 2850, ordinary user who does not know where to download the driver, it seems to me that it will be very inconvenient. I immediately liked the firmware version 62, because the first one turned out to be sewn in, and secondly, the printer remained the same as it was the Xerox Phaser 3160, but the printer was already unlocked. Here are the reports that the printers printed after flashing:
Firmware version 62
Firmware version 79
where to fill a cartridge for a printer in Donetsk OOO PRINT MASTER DONETSK 0997245120
TO REFILL THE CARTRIDGE AT DEPARTURE to the MFP printer repair LLC PRINT MASTER DONETSK 0997245120 MFP copier printer DONETSK VOROSHILOVSKY DISTRICT CASHLESS AND CASH PAYMENT
firmware printer repair
refilling printers in Donetsk S Vyezdomooo PRINT MASTER DONETSK 0997245120 refilling a cartridge in Donetsk PRINT MASTER LLC mts 099 724 51 20 kievstar 0
repair and refueling laser printer MFP copier Donetsk Voroshilovsky OOO PRINT MASTER DONETSK 0997245120
refueling laser cartridge with departure Donetsk LLC PRINT MASTER 099 724 51 20 LLC PRINT MASTER DONETSK 0997245120
PRINTER REFILLING OF PRINTERS IN MOSCOW REFILLING OF CARTRIDGES IN MOSCOW PRINTER FIRMWARE IN MOSCOW LLC PRINT MASTER DONETSK 0997245120
where to refill a cartridge for a printer in MOSCOW
Too much money spent on buying new cartridges? Each printed piece of paper is priced like gold? Do you want to forget about this headache?
There is an exit, Xerox Phaser 3160 printer firmware will solve all your problems.
Unique opportunity. Now there is no need to constantly buy new cartridges. the engineers of our center have:
- Professional performer.
- Huge experience in flashing similar MFPs and printers.
- Serious reputation in Moscow.
- Unprecedented guarantee.
How it works?
It's important to know!!! Xerox Firmware The Phaser 3160 is manufactured ONLY ONCE. For subsequent refills of cartridges, flash the printer NO NEED.
Printer firmware and zeroing of the Xerox 108R00908 cartridge takes no more than 10 - 15 minutes. In the case of performing work on the road, the client must have a computer and the Internet, otherwise inform the operator about the absence of such.
We have stitched over 10,000 different printers. Every day, the engineers of our center are working on the creation of modern flashing. In our assortment there are not only chipping of Xerox 108R00908 cartridges, but also replacement of the firmware of the most latest models your series.
Refilling Xerox Cartridges 108R00908
Attention. If the printer has never been flashed or chipped yet, no refills can make it work. Printer firmware required. We repeat once again, the firmware is being produced JUST ONE TIME.
Our company specializes not only in firmware and resetting various versions printers. We can refill any cartridge. There are two options: stationary and on the road. If the work is done in our office, a number of preventive works are carried out:
- Cleaning of the cartridge hoppers is MANDATORY with a special vacuum cleaner.
- Cartridge contacts are lubricated with conductive grease.
- Restoration of the cartridge (performed permanently and on the road) (if necessary).
The above list of works does not increase the price, but increases and improves the performance of the cartridge. So, if time permits, every 2-3 refills, it is better to bring the cartridge to our workshop.
More detailed information about refilling this cartridge, is on the page "".
original and compatible cartridges Xerox 108R00908
Is your cartridge starting to give black streaks? Printing, even after flashing, refueling and recovery, leaves much to be desired? Or you just simply do not want to take risks, but want to buy a new cartridge?
For you, in our assortment there are various types of cartridges. We work with both original and non-original. We will be able to deliver the cartridge for your printer as soon as possible.
More detailed information is on the page "".
Better conditions cooperation
5 reasons in our favor
Perfect Company offers completely different, unique terms of cooperation:
- We know everything about the firmware. Our engineers have flashed over 10,000 different printer versions. We are approached by engineers from other companies who, for whatever reason, did not cope with the work. Only we know about 3 ways to flash a printer. If a client orders a Xerox Phaser 3160 printer reset from us, then 100% of the work will be done at a very high level.
- We know everything about laser refilling. Trainings of communication and development of office equipment give the right to assert that no matter what manager communicates with our clients, the customer will receive a competent and accurate answer.
- Urgent departure in Moscow. We offer our customers an urgent and most attractive free departure. We spend no more than 2 hours on an order of any complexity.
- Paying is your right. - This is a unique service for which we give a guarantee. Not satisfied with the quality of the printout after the work done? We will refund the money in full.
- Funny price. Offering the above conditions, prices do not suffer from this. Adequate cost of services will pleasantly surprise you.
- Contract advantage. By signing a long-term contract, you will get a truly professional team and stop thinking about your printers + the possibility of ordering in the first place.
Having worked in this area for a considerable time, a colossal client base has been accumulated. Our customers receive the most favorable terms of cooperation, respectful communication with technology and pleasant communication.
The cost of our services directly depends on you. Our discounts are calculated from the volume of the order and the accumulative system. For the client, a special page is opened, where all our relationships are visible.
Deadlines are negotiated separately. For the most urgent order, we will spend no more than 1 hour + the Xerox Phaser 3160 (108R00908) cartridge zeroing and chipping department is open on weekends
Payment is made both in cash and by bank transfer. There are many options for paying with electronic money. Regular customers are allowed to pay by bank transfer after the order is completed.
Warranty TermsBefore making a final decision, read all the warranty nuances that you may not have known about:
- Printer firmware. An exciting question. What will happen to the guarantee? The firmware of the Xerox Phaser 3160 printer is made without interfering with the case and the machine's boards. An engineer can easily upload and roll back the flashing, which means restoring the factory settings, which means the WARRANTY IS KEEPED.
- Factory warranty. IT'S IMPORTANT TO KNOW!!! Warranty service centres, will refuse to repair you under warranty if they discover the fact of refueling or flashing. The client takes responsibility and decides to keep the factory warranty, but overpay for original cartridge or save, but lose the manufacturer's warranty.
- Our guarantee. Our engineers are experienced and know what they are doing. After finishing the work, the engineer installs the sticker of our company (important, check the warranty stickers), which is the guarantor of our professionalism. Any problem that has arisen, after we have performed the service, is solved under warranty.
Printer firmware (firmware)
is the setting software printer with a fixed code that resets the counter of printed pages and prevents the printer from blocking.
Crypto protection (in other words, protection against refueling) installed in modern Samsung and Xerox devices counts down the specified value by the formatter program code (shown in the picture), the number of pages printed, after which the printer is blocked and until you install a new cartridge or flash your printer, it will not work. The firmware of the device is done without opening and other actions aimed at violating the integrity, the printer is entered into the service mode, after which the FIX is loaded via USB.
On the issue manufacturer's warranty. If you are worried that in the event of a printer breakdown you will not be able to contact the warranty workshop, we want to reassure you, let's say your paper pickup roller is broken, you are going to carry the printer or MFP to the service, you can return firmware
firmware for the period of repair in the warranty workshop of the manufacturer or seller. Many of our customers turn to the warranty service and save a lot on refilling cartridges. Let's try to calculate the savings on the example of one printer... well, for example Samsung ML-1660. Now many are wondering "What is printer firmware?".
An average-sized office buys a new cartridge (2240 rubles) about once a month. Refilling the cartridge (350 rubles) is also required approximately once a month. The printer will last approximately 4 years or 48 months.
2240 rub. x 48 months = 107520 rub. This is an approximate cost for the purchase of cartridges for 4 years (WOW!!!..........)
350 rub. cartridge refill x 48 months =16800 rub. refueling expense for 4 years + 1000 rubles. (firmware) = 17800 rubles.
Thus, an exemplary saving for 4 years will be89720 rubles, (it's over, this is a rough calculation, during this time you will have to buy several cartridges since the physical resource is limited) and this is on 1 printer, and now think, do office equipment manufacturers not want to lose that kind of money from users of their printers and MFPs? Of course, Samsung and Xerox are against refilling cartridges in any form, the fight against refillers continues until the economy wins, we'll see what happens next.
Our services:
Estimated prices for services
Name of works
b/w f. A4
up to 16 ppm
b/w f. A3
up to 16 ppm
b/w f. A3
16-24 ppm
b/w f. A3
25 - 39 ppmb/w f. A3
40-59 ppm
Departure of an engineer within the Moscow Ring Road 1000 1000 1000 1000 1000 Departure of an engineer outside the Moscow Ring Road according to the agreements according to the agreements according to the agreements according to the agreements according to the agreements Diagnostics (paid in case of refusal to repair) 300 360 500 700 1000 Prevention 850 1020 1100 1450 1850 Resetting error codes 200 240 200 250 300 Replacing Paper Feed/Original Parts 750 900 950 1100 1200 Paper/Original Feed Unit Repair 850 1020 1000 1200 1300 Replacing Paper Transport Parts 700 840 800 900 1000 Paper transport unit repair 800 960 900 1000 1100 Replacing the drum unit and squeegee 800 960 1100 1300 1600 Replacing the Teflon Roll 600 720 850 950 1050 Tefl bearing replacement shaft 300 360 350 400 450 Replacing the rubber shaft 650 780 700 950 1050 Replacing rubber shaft bearings 300 360 400 400 450 Felt roller replacement 400 480 450 450 500 Thermal film replacement 750 900 950 1200 1400 Fuser Replacement 750 900 950 1200 1400 Coronator/Charge Roller Repair 400 480 500 600 800 Change of developer 500 600 550 600 700 Removing the electronic component a (boards) 250 300 300 500 650 Repair of electronic component a (boards) 800 960 1000 1200 1400 Removing the Drive Assembly 200 240 450 500 700 Drive Unit Repair 750 900 1000 1200 1500 Repair of mechanical components 700 840 900 1000 1300 Function block replacement 700 840 900 1100 1300 Scanner Assembly Repair 800 960 1000 1200 1300 Adjustment-calibration of the scanner assembly 600 720 800 900 1100
The Xerox Phaser 3160 printer, which uses Laser B/W printing technology with a maximum paper size of A4, a print resolution of 1200x1200dpi and a print speed of up to 24ppm pages per minute, its use in small and medium-sized businesses, at home with a small amount of printing , perfectly proved itself in terms of quality and the possibility of refilling cartridges.
The starter cartridge is designed for 600-700 pages (this is the starter - trial cartridge) at which time the Xerox Phaser 3160 Printer indicates that the toner cartridge is running out and you need to buy and install a new one. But here there is a choice - buy a new cartridge or refill an empty one. If you choose the second option, a certain problem appears, namely: a microcircuit (chip) is built into the cartridges for this printer, it transmits information about the remaining toner in the cartridge hopper to the machine. And if you are refilling a cartridge, it is not enough to cover it with toner, you need to remove crypto protection from the chip (block the count of printed pages).
Here again, there are two options for solving the problem - change the chip in the cartridge or the printer firmware (software change) in the printer. Replacing the chip is an expensive pleasure, since the chip has to be changed every time the cartridges are refilled, this is the main disadvantage of the replacement. The second one is much more profitable and less problematic than the constant replacement of the chip - the Xerox Phaser 3160 printer is reflashed once and for all.
The firmware of the Xerox Phaser 3160 printer is carried out both in our workshop (1-2 hours in time) and in the client's office. The customer must have a computer (laptop) with operating system Windows and an Internet connection.
