home > A computer > Entrance to the dir 615 router. Installing the router in place

Entrance to the dir 615 router. Installing the router in place

How to set up a D-link DIR-615 router? I recently purchased this device and now I can’t set it up in any way. Of course, the point is most likely in me, since before this router I did not have such devices at all. In short, I won’t lie, I can’t even enter the router settings, I type in Opera browser address 192.168.0.1 and a white page comes out. The router is connected to a desktop computer with installed Windows 7. I also have a laptop that I want to connect to the router via Wi-Fi. Elena.

Hello admin, such a question, how to set up a D-link DIR-615 router if I have Home Internet from Beeline and also Beeline TV? I explain everything in order. A month ago, I decided to connect the Internet and Home TV - Beeline. I called Beeline and gave an application. The masters came and pulled the ISP cable from the corridor and connected it to some black box (which turned out to be an outdated 5-port switch) D-link DES-1005A and this switch was connected using a LAN cable to my computer, and the Internet appeared on it . Next, they connected a set-top box to my TV, which, in turn, was also connected to the DES-1005A switch using another network cable. Appeared homemade digital television. All this would be nice, but we also have a laptop. Due to my computer ignorance, I thought that the D-link DES-1005A switch can distribute Wi-Fi, but in your comment you explained to me that this is not the case and it cannot distribute any Wi-Fi. The D-link DES-1005A switch has been out of production for a long time and can do nothing except create a conventional wired local network. So I have a question, if I want to have Wi-Fi, then I have to buy a router as well? I called Beeline for a consultation, they immediately began to offer me their proprietary Beeline router, and as they say in support, only with it they guarantee the normal operation of the Internet.

Tell me how to set up a D-link DIR-615 router with everything that I currently have? Or is it better to ask in a different way: - Can I replace the outdated D-link DES-1005A switch with a D-link DIR-615 router? Anatoly.

How to set up a D-link DIR-615 router

Friends, in this article we will set up a D-link DIR-615 router for the Beeline provider, but the article is also useful for those users who have a different Internet provider, since the difference in settings is minimal. At the end of the article there is a short instruction for the Dom.ru provider.

First of all, we will correctly connect our router. Let's connect the local Internet cable provided by your provider to the WAN port on the router, you can see everything on the screenshot, it says internet, and connect the router and your desktop computer with a network cable (in our case, blue) through LAN port number 1.

Firmware update for D-link DIR-615 router

Secondly - update router firmware D-link DIR-615. According to my observations, almost all D-link DIR-615 routers on sale have outdated version firmware 1.0.0. On the official website of D-Link posted a new version firmware 1.0.18 for our router. FROM new firmware the router will work more stable, the interface will be prettier, and most importantly, in the settings there is now the ability to configure Internet TV.

We go to the D-link website, as we see, there are two firmware versions for hardware revisions K1 and K2,

Determining which firmware you need is very simple. On the back of our router there is a sticker with all the information about our router on it: serial number, MAC address and revision. As you can see, I have K1.

In order to flash our router and configure it, go to its settings, for this we need to type the numbers 192.168.0.1 in the address bar of any browser and press Enter. If after that you do not see a window for entering a login and password to enter the router settings, then you need to clear the browser cache, or reinstall the browser completely, or try using a different browser.
We type the numbers 192.168.0.1 in the address bar of the browser and press Enter, a login and password entry window appears, by default they are admin and admin.

Immediately you will be prompted to change the used simple password to another one. So that Wi-Fi neighbors do not go into the settings of our router, specify New Password and confirm the change. And here we are in the main settings window of the D-link DIR-615 router, there are blue buttons on a white background, after changing the firmware, the settings interface will change to a more convenient and beautiful one.
Select the Configure Manually button,

An explorer window will open, select the file with the firmware

And click Open, Update.

Update in progress software. opens new interface settings of the D-link DIR-615 router. Enter the login admin and password, then change the password to a more complex one.

Friends, before setting up the D-link DIR-615 router, let's leave it alone for five minutes. We need to make some minor tweaks to our operating system.
On Windows XP. Start - Control Panel - Network connections- Local Area Connection - Properties - Internet Protocol (TCP/IP) -Properties - and .

In Windows 7 and in Windows 8 . Enter Properties - Internet Protocol version 4 (TCP / IPv4) and set the setting Obtain an IP address automatically and Obtain DNS Server Address Automatically.
Now back to our router. So, enter the username admin and password,

Celebrating L2TP + Dynamic IP.

Obtain DNS Server Address Automatically.

Enter the username. Password. Password confirmation. VPN server address tp.internet.beeline.ru . Apply. Further.

Apply.

Router setup goes to Wi-Fi settings.

Router.

SSID DIR-615 .

Network authentication. Select Secure network. We come up with a Security Key and Next.

You can connect a TV box directly to the router.

For example, I connected Home TV - Beeline to router port number 4, select it with the left mouse and Next.

If you do not have Home TV - Beeline, you can skip this step. Save.

Setting up a DOM.ru connection
The whole difference between the Beeline provider and DOM.ru is in the network protocol. DOM.ru uses network protocol link layer PPPoE, it should be selected during the router settings.

In this article, we will be configuring the very popular D-link DIR-615 router. I will write an article using an example. And if you have a different model, then it's okay, almost everything is the same there. This manual is suitable for many D-link routers. I will try to write about everything in detail and on understandable language. I won’t talk much about the router itself, read my review and another useful information about DIR-615/A, you can follow the link above. Let me just say that this router is well suited for home or small office. It will easily provide stable Internet access for your computers, phones, tablets (via Wi-Fi) and other devices.

As for setting up the D-link DIR-615, everything is very simple there. And if your provider uses Dynamic IP connection technology, then you just need to connect a router, and the Internet will already work. You will only need to set a password for the Wi-Fi network and change the network name if necessary. The only thing I don't like is that the settings in D-link change in almost every version (in appearance). I have entered the control panel of the router. And therefore, the settings of your router may differ from those that you will see in this article. But a firmware update might fix it.

We will configure the D-link DIR-615 according to the following scheme:

Connecting and entering the control panel on D-link DIR-615
Internet setup on D-link DIR-615 (connections to provider)
WiFi setup networks and password change

And now, about everything in more detail.

Connect D-link DIR-615 and go to settings

Connect power to the router and turn it on. If the indicators on the front panel of the router do not light up, then check if the power is turned on with the button on the rear panel. If you are configuring the router by cable, then take network cable supplied, connect the router to the computer. One end of the cable is connected to black LAN connector (in 1 of 4), and connect the other end to the network card of the computer (laptop). Connect the cable from the Internet provider to yellow WAN connector.

If you do not have a computer with network card, or there is no cable, then everything can be configured via Wi-Fi. You can even use your phone or tablet.

You can also change the administrator password, which is used to access the router settings. If you did not change it, or changed it, but have already forgotten, then you can do this on the tab System - Administrator password.

Enter your new password twice and click Apply. Don't forget to save your settings.

Be sure to write down this password somewhere. If you forget it, you will not be able to enter the control panel, and you will have to do a factory reset.

Afterword

Phew, I'm tired :) I won't write anything else. If you have any questions about the article, ask in the comments. I hope you managed to set up your router.

Before proceeding with setting up the router, let's check the LAN connection settings. For this:

Windows 7

1. Click on " Start", "Control Panel".

2. Click on " View network status and tasks".

3. Click on " Change adapter settings".

4. LAN connectionProperty".

5. From the list select " Internet Protocol Version 4 (TCP/IPv4)"and press" Property".

6. " and "", then press the button " Ok".

Windows 10

1. Click on " Start", "Options".

2. Click on " Network and Internet".

3. Choose " ethernet" and click on " Configuring Adapter Options".

4. In the window that opens we see " ethernet". Click on it with the right mouse button, select " Property".

5. From the list select " IP version 4 (TCP/IPv4)"and press" Property".

6. In the window that opens, you need to check the boxes " Obtain an IP address automatically" and " Obtain DNS Server Address Automatically", then press the button" Ok".

Connecting a router D-Link DIR-615 to the computer

The next step is to connect the router D-Link DIR-615 to your laptop or personal computer. To do this, you need to connect the cable that your provider ran to the port of the router, where it is signed INTERNET, in older models given port signed as WAN. The cable that came with the router, connect one end to a laptop or computer, connect the other end to one of the four ports that are marked in black on the router (the colors of the ports may vary depending on the version of the router). And yes, do not forget to connect the power cable.

Authorization of the D-Link DIR-615 router

So, we connected the router, now you need to use any browser (be it Google Chrome, Mozilla Firefox, Internet Explorer, etc.) get into its web interface. To do this, open the browser and in the address bar we drive in the address of the router: 192.168.0.1

Username - admin
Password - leave blank

So, we drive in the data and click " Log in"

Setting up a router D-Link DIR-615.

And finally, we got to the web interface of the router and now you need to configure the equipment. First of all, we will secure the wireless network by setting a password for wi-fi. Then you will need to find out what type of connection is used to access the Internet, is it PPTP, L2TP or PPPOE. You can find out by calling your provider (this is the organization with which you have entered into an agreement to provide Internet services). So, let's start setting up the router.

I suggest you take a look detailed video instruction for setting up the router D-Link DIR-615:

Setting a password for wi-fi on a router D-Link DIR-615.

1. On the Web interface, select the tab " Wireless Settings", then " Manual Wireless Connection Setup".

2. In step " WI-FI PROTECTED SETUP" uncheck the box to enable this setting: " enable".
3. Below in the line " Wireless Network Name:" come up with and indicate the name of your wireless network, given name in the future, it will glow when you connect to the network.
4. Select below " Security Mode:" - "Enable WPA/WPA2 Wireless Security".
5. Below in " Network Key:"Create and type in a password.
6. Then press " Save Settings".

Setting up PPTP on the router D-Link DIR-615.

1. Internet", then " Manual Configure".

2. In step " My Internet Connection is:"choose" Russia PPTP (Dual Access)".
3. Server IP/Name:PPTP Account:", password in line " PPTP Password:PPTP Retype password:".

4. Check the box " Connect mode select:" - "always-on
5. Save Settings".

Setting up PPTP with a static IP address on the router D-Link DIR-615.

PPTP with static IP on the router D-Link DIR-615
1. Go to the menu in the tab " Internet", then " Manual Configure".

2. In step " My Internet Connection is:"choose" Russia PPTP (Dual Access)".
3. Below you will be prompted to specify the ip-address of the server in the line " Server IP/Name:", username in the string " PPTP Account:", password in line " PPTP Password:" and password confirmation in line " PPTP Retype password:".
4. Check the box " Connect mode select:" - "always-on", this setting will keep you connected to the internet all the time.
5. static IP"
6. IP address:", subnet mask in line " subnet mask:", default gateway in line " gateway:" and DNS in line " Primary DNS Address:". All of the above data is provided to you by the provider (the organization that provided you with the Internet).
All this data is usually prescribed in the contract with the provider. If for some reason you could not find them, you need to call hotline your provider and find out how to get them.
7. After all the manipulations with the settings, press the button " Save Settings".

Setting up L2TP on the router D-Link DIR-615.

1. Go to the menu in the tab " Internet", then " Manual Configure".

2. In step " My Internet Connection is:"choose" L2TP".
3. Below you will be prompted to specify the ip-address of the server in the line " Server IP/Name:", username in the string " L2TP Account:", password in line " L2TP Password:" and password confirmation in line " L2TP Retype password:".
All of the above data is provided to you by the provider (the organization that provided you with the Internet).
All this data is usually prescribed in the contract with the provider. If for some reason you can't find them, you need to call your provider's hotline and find out how to get them.
4. Check the box " Connect mode select:" - "always-on", this setting will keep the Internet connection permanent.
5. After all the manipulations with the settings, press the button " Save Settings".

Setting up L2TP with a static IP address on the router D-Link DIR-615.

Consider connection setup L2TP with static IP on the router D-Link DIR-615. Usually a static IP address is provided legal entities, either as additional service to the basic tariff for individuals.
1. Go to the menu in the tab " Internet", then " Manual Configure".

2. In step " My Internet Connection is:"choose" L2TP".
3. Since the connection uses a static ip address, check the " static IP"
4. Specify the ip-address in the line " IP address:", subnet mask in line " subnet mask:", default gateway in line " gateway:" and DNS in line " DNS:".
5. Below we indicate the ip-address of the server in the line " Server IP/Name:", username in the string " L2TP Account:", password in line " L2TP Password:" and password confirmation in line " L2TP Retype password:".
All of the above data is provided to you by the provider (the organization that provided you with the Internet).
All this data is usually prescribed in the contract with the provider. If for some reason you can't find them, you need to call your provider's hotline and find out how to get them.
6. Check the box " Connect mode select:" - "always-on", this setting will keep the Internet connection permanent.
7. After all the manipulations with the settings, press the button " Save Settings".

Setting up PPPOE on the router D-Link DIR-615.

1. Go to the menu in the tab " Internet", then " Manual Configure".

2. In step " My Internet Connection is:"choose" Russia PPPOE (Dual Access)".
3. Username:", password in line " Password:" and password confirmation in line " Change password:".
All of the above data is provided to you by the provider (the organization that provided you with the Internet).
All this data is usually prescribed in the contract with the provider. If for some reason you can't find them, you need to call your provider's hotline and find out how to get them.
4. Check the box " Connect mode select:" - "always-on", this setting will keep the Internet connection permanent.
5. After all the manipulations with the settings, press the button " Save Settings".

Setting up PPPOE with a static IP address on the router D-Link DIR-615.

Consider connection setup PPPO with static IP on the router D-Link DIR-615. Typically, a static IP address is provided to legal entities, or as an additional service to the basic tariff for individuals.
1. Go to the menu in the tab " Internet", then " Manual Configure".

2. In step " My Internet Connection is:"choose" Russia PPPOE (Dual Access)".
3. Since the connection uses a static ip address, check the " Static PPPOE"
4. Below we indicate the username in the line " Username:", password in line " Password:" and password confirmation in line " Change password:".
5. Specify the ip-address in the line " IP address:"
6. Check the box " Connect mode select:" - "always-on", this setting will keep the Internet connection permanent.
7. Put a tick " static IP"
8. Specify the ip-address in the line " IP address:" it will be the same as above, subnet mask in line " subnet mask:".
All of the above data is provided to you by the provider (the organization that provided you with the Internet).
All this data is usually prescribed in the contract with the provider. If for some reason you can't find them, you need to call your provider's hotline and find out how to get them.
9. After all the manipulations with the settings, press the button " Save Settings".

Changing the web interface password on the router D-Link DIR-615

I bring to your attention Video instructions for changing the password on the web interface of the router D-Link DIR-615.

Resetting the web interface password on the router D-Link DIR-615

In case you have set a password on the web interface of the router and forgot it, I suggest you watch the Video instruction on resetting the password of the web interface on the router D-Link DIR-615.

Firmware update on the router D-Link DIR-615

I bring to your attention Video instructions for updating the firmware on the router D-Link DIR-615.

Connecting a computer to wi-fi

After connecting and configuring the router, you need to connect the computer to a wireless network (wi-fi), consider connecting to wi-fi in two operating systems, this is Windows 7 and Windows 10:

Windows 7

Video instruction

2. Sultan

3. Connect automatically" and press
"Connection".

4. You must specify " Security keyOK".

Windows 10

Video instruction

1. In the lower right corner of the desktop we find the icon for the wireless network (wi-fi), click on it with the left mouse button.

2. A window pops up with a list of available wireless networks. We select a wireless network, in my case it is a network " Sultanova"(You choose the network whose name was given when).

3. After selecting a network, check the box next to " Connect automatically" and press " connect".

4. You must specify " Security key"this is the wireless network password that you specified when. After you have specified the key, press " Further".

5. We wait, perhaps a couple of seconds, and you are connected to your wireless network.

In order to get into the web interface of the router, you need to open your Internet browser and type 192. 168.0.1 in the address bar, Username - admin , Password - admin(provided that the router has factory settings and its IP has not changed).

Change factory password

Default: Login admin, password admin.

In the interface of the router, you need to go to the tab System, menu Administrator password.

In field Password (New Password) Enter a new password.

In field Confirmation (Confirm Password) repeat new password.

After that, the router will prompt you to re-enter its settings.

Internet connection setup

On the page Advanced settings; select Net; ⇒WAN;.

Click on the button Add.

Setting up a PPPoE connection

In field Connection type: select PPPoE
In field Port select the WAN port - it is listed there as Port 5.
Username: Your login from the contract
Password: Your contract password
Password confirmation: repeat password
Authentication algorithm: Auto
keep alive
MTU

In field Miscellaneous NAT and Firewall.

Enable IGMP.

Setting up an L2TP connection

In field Connection type: select L2TP + Dynamic IP
In the Port field, select the WAN port - it is listed there as Port 5.
Username: Your login from the contract
Password: Your contract password
Password confirmation: repeat password
VPN server address: write down the address of the provider's VPN server
Authentication algorithm: Auto
keep alive- check the box for permanent connection
MTU- change the value to 1450 or less

In field Miscellaneous make sure the checkboxes are checked NAT and Firewall.

If the provider provides Internet TV service, check the box Enable IGMP.

Setting up PPtP (VPN) when automatically obtaining a local IP address (DHCP)

In field Connection Type: select PPTP+ Dynamic IP
In field Name enter the name of the connection (you can not change)
Username: Your login from the contract
Password: Your contract password
Password confirmation: repeat password
Connect automatically: put a tick
MTU change the value to 1450 or less
Authentication algorithm: Auto
keep alive- check the box for permanent connection
Save the settings with the button and reboot the router.

Setting up Wi-Fi on the router

1. From the advanced settings page, go to the tab WiFi, select the item basic settings; and set the desired name of the wireless access point SSID. After that we press Change;.

2. After that, it is also recommended to set a password for your wireless network. To do this, go to settings wifi security, select the type of authorization (WPA2/PSK is recommended), and then enter any password of at least 8 characters - this will help protect your wireless network from unauthorized access. Save your changes.

That's all: now you can try to use the Internet via a wireless Wi-Fi connection from a laptop, tablet or any other equipment.

Checking the Internet Connection Status

If the connection is created correctly and there are no problems from the provider, then in the column " Network Information", WAN connection status it will say connected and your ip-address.

Saving/restoring router settings

Choose to save the current configuration. To save the current settings of the router, the settings file will be saved to the specified location on the hard drive.
To restore settings from a file, you must click and select Loading a previously saved configuration to the device, specify the path to the file with settings, then click the button.

Before proceeding with setting up the router, let's check the LAN connection settings. For this:

Windows 7

1. Click on " Start", "Control Panel".

2. Click on " View network status and tasks".

3. Click on " Change adapter settings".

4. LAN connectionProperty".

5. From the list select " Internet Protocol Version 4 (TCP/IPv4)"and press" Property".

6. " and "", then press the button " Ok".

Windows 10

1. Click on " Start", "Options".

2. Click on " Network and Internet".

3. Choose " ethernet" and click on " Configuring Adapter Options".

4. In the window that opens we see " ethernet". Click on it with the right mouse button, select " Property".

5. From the list select " IP version 4 (TCP/IPv4)"and press" Property".

6. In the window that opens, you need to check the boxes " Obtain an IP address automatically" and " Obtain DNS Server Address Automatically", then press the button" Ok".

Connecting a router D-Link DIR-615 to the computer

The next step is to connect the router D-Link DIR-615 to your laptop or personal computer. To do this, you need to connect the cable that your provider ran to the port of the router, where it is signed INTERNET, in older models this port is signed as WAN. The cable that came with the router, connect one end to a laptop or computer, connect the other end to one of the four ports that are marked in black on the router (the colors of the ports may vary depending on the version of the router). And yes, do not forget to connect the power cable.

Authorization of the D-Link DIR-615 router

So, we connected the router, now you need to get into its web interface through any browser (be it Google Chrome, Mozilla Firefox, Internet Explorer, etc.). To do this, open the browser and in the address bar we drive in the address of the router: 192.168.0.1

Username - admin
Password - admin

So, we drive in the data and click " Enter"

Setting up a router D-Link DIR-615.

Setting a password for wi-fi on a router D-Link DIR-615.

1. Select in the web interface menu " WiFi"and get into" basic settings"
2. Let's check" Enable wireless connection" and " Broadcast wireless network" must be checked.
3. Below in the line " SSID:" come up with and specify the name of your wireless network, this name will continue to glow when you connect to the network.
4. "Country" - "Russian Federation", "Channel" - "auto", "Wireless mode" - "802.11 B/G/N mixed".
5. Press " Apply".

6. On the menu " WiFi"choose" Security Settings".
7. In line " Network Authentication:"choose" WPA2-PSK".
8. In line " PSK Encryption Key:" you need to come up with and enter a password for the wireless network that we created above.
9. Press " Apply".

Setting up PPTP on the router D-Link DIR-615.

1. Net", get into the settings" WAN".
2. Press " Add".

3. In step " Connection type:"choose" PPTP+Dynamic IP".
4. Check the box next to " Connect automatically".
5. Username:"), password (on the line " Password:Password confirmation:VPN server address:").

6. Apply".

Setting up PPTP with a static IP address on the router D-Link DIR-615.

PPTP with static IP on the router D-Link DIR-615
1. In the web interface menu, select " Net", get into the settings" WAN".
2. Press " Add".

3. In step " Connection type:"choose" PPTP+Static IP".
4. Below in the section IPIP address:", subnet mask in line " Netmask:", default gateway in line " Gateway IP address:" and DNS in line " Primary DNS Server:".
5. Check the box next to " Connect automatically".
6. Below we drive in the Username (in the line " Username:"), password (on the line " Password:"), confirm the password (in the line " Password confirmation:") and specify the server address (in the line " VPN server address:").
All of the above data is provided to you by the provider (the organization that provided you with the Internet).
All this data is usually prescribed in the contract with the provider. If for some reason you can't find them, you need to call your provider's hotline and find out how to get them.
7. After all the manipulations with the settings, press the button " Apply".

Setting up L2TP on the router D-Link DIR-615.

1. In the web interface menu, select " Net", get into the settings" WAN".
2. Press " Add".

3. In step " Connection type:"choose" L2TP+Dynamic IP".
4. Check the box next to " Connect automatically".
5. Below we drive in the Username (in the line " Username:"), password (on the line " Password:"), confirm the password (in the line " Password confirmation:") and specify the server address (in the line " VPN server address:").
All of the above data is provided to you by the provider (the organization that provided you with the Internet).
All this data is usually prescribed in the contract with the provider. If for some reason you can't find them, you need to call your provider's hotline and find out how to get them.
6. After all the manipulations with the settings, press the button " Apply".

Setting up L2TP with a static IP address on the router D-Link DIR-615.

Consider connection setup L2TP with static IP on the router D-Link DIR-615. Typically, a static IP address is provided to legal entities, or as an additional service to the basic tariff for individuals.
1. In the web interface menu, select " Net", get into the settings" WAN".
2. Press " Add".

3. In step " Connection type:"choose" L2TP+Static IP".
4. Below in the section IP"specify the ip-address in the line" IP address:", subnet mask in line " Netmask:", default gateway in line " Gateway IP address:" and DNS in line " Primary DNS Server:".
5. Check the box next to " Connect automatically".
6. Below we drive in the Username (in the line " Username:"), password (on the line " Password:"), confirm the password (in the line " Password confirmation:") and specify the server address (in the line " VPN server address:").
All of the above data is provided to you by the provider (the organization that provided you with the Internet).
All this data is usually prescribed in the contract with the provider. If for some reason you can't find them, you need to call your provider's hotline and find out how to get them.
7. After all the manipulations with the settings, press the button " Apply".

Setting up PPPOE on the router D-Link DIR-615.

1. In the web interface menu, select " Net", get into the settings" WAN".
2. Press " Add".

3. In step " Connection type:"choose" PPPOE+Dynamic IP".
4. Below we drive in the Username (in the line " Username:"), password (on the line " Password:Password confirmation:").
All of the above data is provided to you by the provider (the organization that provided you with the Internet).
All this data is usually prescribed in the contract with the provider. If for some reason you can't find them, you need to call your provider's hotline and find out how to get them.
5. After all the manipulations with the settings, press the button " Apply".

Setting up PPPOE with a static IP address on the router D-Link DIR-615.

Consider connection setup PPPOE with static IP address on the router D-Link DIR-615. Typically, a static IP address is provided to legal entities, or as an additional service to the basic tariff for individuals.
1. In the web interface menu, select " Net", get into the settings" WAN".
2. Press " Add".

3. In step " Connection type:"choose" PPPOE+Static IP".
4. Below in the section IP"specify the ip-address in the line" IP address:", subnet mask in line " Netmask:", default gateway in line " Gateway IP address:" and DNS in line " Primary DNS Server:".
5. Below we drive in the Username (in the line " Username:"), password (on the line " Password:") and confirm the password (in the line " Password confirmation:").
All of the above data is provided to you by the provider (the organization that provided you with the Internet).
All this data is usually prescribed in the contract with the provider. If for some reason you can't find them, you need to call your provider's hotline and find out how to get them.
6. After all the manipulations with the settings, press the button " Apply".

Connecting a computer to wi-fi

After connecting and configuring the router, you need to connect the computer to a wireless network (wi-fi), consider connecting to wi-fi in two operating systems, these are Windows 7 and Windows 10:

Windows 7

Video instruction

2. Sultan

3. Connect automatically" and press
"Connection".

4. You must specify " Security keyOK".

Windows 10

Video instruction

1. In the lower right corner of the desktop we find the icon for the wireless network (wi-fi), click on it with the left mouse button.

2. A window pops up with a list of available wireless networks. We select a wireless network, in my case it is a network " Sultanova"(You choose the network whose name was given when).

3. After selecting a network, check the box next to " Connect automatically" and press " connect".

4. You must specify " Security key"this is the wireless network password that you specified when. After you have specified the key, press " Further".

5. We wait, perhaps a couple of seconds, and you are connected to your wireless network.