Connecting a zyxel keenetic start router to a beeline. Inexpensive router Zyxel Keenetic Start II

Zyxel Keenetic Start is a light model of Zyxel Keenetic. Nevertheless, Keenetic Start will perfectly solve the problem of connecting electronic devices to the Internet. The router will allow you to combine home computers and all kinds of gadgets into a network and provide simultaneous Internet access from several devices via Wi-Fi.

For guest devices, it is possible to allocate separate Wi-Fi networks with Internet access, but with limited access to personal data. The firewall is responsible for information security home network.

Complete set of the router and its appearance

The package bundle of the router is minimal: small network cable, documentation and power supply. All inscriptions on the body of the device are made in Russian. Wall mount available. In a convenient place is the WPS activation key - a function that allows you to simply and immediately connect to the router WiFi devices, without using an encryption key.

In appearance, the router in question is very similar to its older brother (Keenetic 4GII). It only differs by the absence of USB ports and the presence of only one 2dBi antenna.

The device is quite compact (140x110x30 mm). Its weight is only 180 grams.

On the top side is applied trademark manufacturer, WPS key to enable automatic secure WiFi connections, and LED indicators power, turn on the wireless WiFi module, the presence of an Internet connection and a connection to lan ports.

All ports and connectors are located on the back of the router.

Connection and preparation for work

Connecting a Zyxel Keenetic Start router may seem complicated at first glance.

Consider the connection process in detail:

After connecting the router, it is important to configure the Zyxel Keenetic Start router. To configure it, you first need to log in to the router interface.

Login to settings

To configure and maintain the router, there is no need for specialized programs. All control of the router is carried out using a web browser.

To enter the interface of the router, you must do the following:

In Zyxel routers, there is a "Quick Setup" for the initial Internet setup.

Internet connections

The router supports several options for connecting to the Internet, which are primarily determined by the choice of a communication service provider.

PPPoE for Dom.ru, TTK and Rostelecom

The sequence of steps for setting up a router from Zyxel for these providers (Rostelecom, TTK and Dom.ru) is as follows:

An Internet connection will be created.

Dynamic IP

To set up an Internet connection with a dynamic address, you must:

An Internet connection with a dynamic IP address is ready.

Video: Zyxel Keenetic Start Review

How to set up a Zyxel Keenetic Start router for beeline

The sequence of steps for setting up the router in question for Beeline is as follows:

As a result of the actions taken, a new connection for Beeline will be created.

LAN

To set options local network on the wifi router necessary:

WiFi

The sequence of actions for setting up a Wi-Fi connection on the Zyxel Keenetic Start device is as follows:

IPTV

IPTV is a special technology that, when transferring information in networks, uses a specialized IP protocol. Thanks to this, TV channels are broadcast using multicast. For IPTV to function, you just need to install the latest firmware version of the device, and the application will automatically make the correct settings.

In the router in question, the “Applications” tab is responsible for setting up IPTV, in which you should enter the required parameters and save.

Reset router

To reset your router, follow these steps:

After that, the power indicator of the router will start flashing and then the router settings will be reset to factory (default settings).

Updating the firmware

Quite often there are cases when it is vital to update the firmware of the device. Despite the fact that this is a very responsible action, if you follow certain instructions, it is not at all difficult to install new version software.

It is recommended to update the software under consideration by connecting to the router using an Ethernet cable. To update the firmware, you need to use the standard component update function. It is important that you have a stable Internet connection when performing the update.

To update the firmware on a Zyxel router, you must:

No wonder Zyxel positions Keenetic Start as an entry-level Internet center. Setting it up is very trivial, and the possibilities allow you to create a compact computer network. it perfect choice for home and small office.

In this guide, we'll take a detailed look at how to set up wifi router Zyxel Keenetic Start KN-1110. Let's see how to connect the Internet and set up a wifi network. For us, this is especially interesting because, in addition to the updated external design compared to the previous Zychsels, the router firmware has also undergone changes. Now the administrator section has become much easier and more convenient to configure wireless network. By the way, just a few days ago I published .

Instructions for connecting a Zyxel Keenetic Start router

To connect the Keenetic Start router to a computer and the Internet and set up a wifi network on it, we can go in two ways:

• Connect it to the PC using the patch cord that is in the box.
• Or immediately connect to the wireless signal from the router

Zyxel Keenetic Start KN-1110 Router Configuration Wizard

After connecting to the router, to enter its control panel, open a browser on a computer or laptop and enter http://192.168.1.1 or . If none of the addresses, then the solution is also on our website.

Change the default password Zyxel Keenetic Start

For novice users of a wifi router, I recommend starting the Keenetic Start setup with step by step wizard. In the first window, you will be asked to change the language of the web interface to Russian.

Then set a password to access the administrator section.

In the event that you find on your router old version blue firmware, then it will be more convenient for you to configure it by

Internet connection

The next few steps are devoted to choosing the mode of operation and the type of Internet connection. First of all, we choose in what capacity Keenetic Start will be used: as the main router, or a signal amplifier or a wifi adapter.

If the second and third options, then go to the "Additional modes" section and select the desired one. I will tell you more about them separately, but now we will configure Keenetic Start as the main router, so we select "Ethernet"

After that, we determine whether we need to leave the MAC address of the router or clone it from the computer. You need to check this with your ISP (some ISPs tie the device to the MAC, preventing others from accessing the network), but to avoid unnecessary conversations, I usually copy it from the main PC that was previously connected via cable.

Now the most important thing is to choose the right IP parameters for connecting to the Internet. There are three types to choose from:

• Automatic - for all types
• Manual - for Static IP
• Without an IP address - PPPoE

Static IP

If your type of Internet connection is "Static IP", then select it in the list and then enter the IP address, mask and gateway that the provider provided you.

For all the rest, select "Automatic" and get to the page for selecting a specific type.

For Rostelecom subscribers - PPPoE

If you are a Rostelecom subscriber, you will need to select the PPPoE type - it is also used by some other providers, check in your contract. Here you will need to enter a username and password to connect to the Internet.

For Beeline - L2TP

L2TP is used even less often, but, oddly enough, Beeline has it. If this is your case, then in addition to the login and password, you also need to register the address of the vpn server.

Dynamic IP

For the majority, this is a regular DHCP or Dynamic IP, when you don’t need to manually register anything and the Internet is configured automatically. If you, like me, use it, then click "No password" and wait for the router to connect.

And finally, at the final step, information about WiFi networks- unfortunately, you can’t configure it here, so we exit the wizard and go to the main menu.

Setting up a Keenetic WiFi network

To set the required parameters for WiFi connections on the Keenetic Start router, you need to go to the section " home network". Here we can:

• Activate wireless signal
• Set network name
• Change password
• Assign encryption type - the strongest is used by default, so I recommend leaving it (WPA2-PSK)

About these and others Keenetic settings Start read in separate publications on our website. https://youtu.be/DqGiZLP63JI

Thank you! Did not help

Through the web interface, you can select the mode of operation of the router as a receiver (wi-fi adapter). Not all routers have this feature.

Minuses

When working as wifi adapter on native firmware v2.06(ABCM.2)A9 the device was constantly skipping packets. Upgrading to v2.07(ABCM.5)C3 fixed the issue.

Review

It so happened that the store did not have the necessary wi-fi adapter. Although it was written on the mvideo website that it was in stock (2 sticks out of 5). As it turned out, they do not update the database very often. Of everything that was in the store, this router interested me. True, its price is slightly higher than that of a conventional wi-fi adapter. ___The site http://www.speedtest.net/ru/ showed a download speed of 14 Mbps, and a transmission speed of 25.95 Mbps. ___ We enter the apartment. Above (above the head) is the router that the provider installed. We pass 5.5 meters forward along the corridor. To the left is a brick wall. Then we turn left into the room, we pass another 6 meters (another brick wall on the left) and 3 meters to the right. Here, in the corner, this router is standing (in receiver mode). ___ Feels much faster than the previous conventional wi-fi adapter (unfortunately, I did not measure the Internet speed for it). The latter periodically disconnected, and then stopped turning on altogether ... ___Some simple tips for not very knowledgeable people (like I was, for example) - when you connect a zyxel router (which is in receiver mode) to the main router, the latter does not have to be connected to the PC via a network cable. - after connecting to the main router, the zyxel router will no longer be available at http://my.keenetic.net or 192.168.1.1. In my case, it was assigned a different ip address 192.168.1.6 . - some interesting information is here help.keenetic.net .

domestic family wireless routers Zyxel Keenetic differs significantly from many similar products on the market. These solutions are developed and officially supplied only in the markets of Russia and the CIS. The most interesting for our users in them is software, created taking into account the peculiarities of domestic providers and their services. In addition, a significant role in its development is played by the location of developers close to the direct users of the products.

Last fall, the company introduced two new devices that are positioned in the upper segment - the Keenetic Giga III and Keenetic Ultra II models. And recently a new representative appeared on the market entry level- the Keenetic Start II model, about which the story will go. Its cost at the time of publication is about 1500 rubles.

Appearance

The router comes in a compact (compared to previous Zyxel solutions) cardboard box, for which blue tones were chosen. The delivery set is minimally sufficient - a router, a power supply unit (9 V 0.6 A) and instructions. Note that the product was originally developed with the Russian language everywhere - from the box to the Web interface, not to mention the website and technical support, and we can rather talk about adding an English version than localization for our market.

The network patch cord was probably not added on purpose, since this is the age of mobile clients. In addition, the router can be perfectly configured “over the air”, including from mobile devices.

In appearance, the router is similar to other devices in the series. Black plastic is used, and we see a practical matte version only on the ends, while the top and bottom panels are glossy.

The body dimensions are about 14x10.5x3 centimeters, excluding antennas. The latter are fixed, have two degrees of freedom and are installed on the side ends. The total length is 18 cm, and the moving part is 16.5 cm. Inside, 5 dBi antennas are installed almost the entire length in the form printed circuit boards, which is more interesting than the options used in previous models of the budget segment.

There are ventilation grilles on the side ends of the case, but it is unlikely that they are necessary in this case. There is one button on the top of the case, for which you can assign actions for one press, double press and long press. By default, it performs the function of connecting clients via WPS and turning Wi-Fi on / off. Three dim green indicators are installed on the front end - status, Wi-Fi and Internet.

On the back, there are two 10/100 Mbps network ports with built-in activity indicators, a hidden reset button, and a power input. Reducing the number of wired ports is another conscious cost reduction move based on the company's own statistics. This, in particular, leads to the impossibility of simultaneously connecting computers and a TV set-top box, which needs its own dedicated port, via cable.

We note the presence at the bottom of two rubber legs and two plastic protrusions, which also act as a wall mount. Between them there is a sticker with a unique name and password for the wireless network, MAC address and other data.

Configuration

The router is assembled on the basis of a MediaTek MT7628N single-chip system with one computing core at 575 MHz. Volume random access memory DDR2 is 64 MB and flash memory is 8 MB. There are only two wired ports, as we wrote above. Their maximum speed is 100 Mbps. For wireless clients, there is an access point that supports 802.11b/g/n in the 2.4GHz band with a maximum connection speed of 300Mbps. Note that there is no hardware NAT in this platform, but there are dedicated blocks for the implementation of some other resource-intensive algorithms.

In general, this is quite a typical modern a budget option. Of the features, we note the presence of only two wired ports, as well as the installation of two antennas.

Software

The firmware of Zyxel Keenetic routers has a modular structure and supports updating via the Internet. Before testing, firmware version V2.07(ABCM.2) was installed on the device. Appearance interface and software capabilities are unified with other devices. The difference can only be due to differences in the hardware configuration (for example, the presence of a second wireless interface or USB ports).

So in addition to convenient operation control, flexible options for connecting to providers, setting up IPTV services, guest wireless network, port translation rules, firewall, alternative operating modes, there are also such interesting and useful features as cloud access for monitoring and control , udpxy server (UDP-HTTP proxy), KeenDNS (proprietary dynamic DNS service), modules for working with SkyDNS and Yandex.DNS, client bandwidth control, PPTP VPN remote access server, and even an IPsec module. Note that cloud KeenDNS is able to provide remote control router even if it uses a "gray" address from the provider.

Performance

This device belongs to the budget segment and is unlikely to be used with high-speed (more than 100 Mbps) Internet connections, gigabit clients or network drives. So you need to evaluate it taking into account work with "ordinary" computers and laptops, as well as inexpensive smartphones and tablets.

Despite the fact that there is only one wired port and, most likely, many simply will not be used, an assessment of the speed of routing over cable in various modes will help to understand the capabilities of the platform.

Considering the platform used and the software optimizations implemented by the company's programmers, we expected exactly such results. We can safely say that the device copes with all connection options at speeds up to 100 Mbps, including in duplex mode. So even in the budget segment today you can find routers that do not limit the performance of mass options for Internet connections.

Recall that this device has only one port for connecting clients via cable. Today, in our opinion, this is quite acceptable for many users who only need a wireless connection for smartphones, laptops and tablets. However, another trouble lurks here - the 2.4 GHz band in urban areas is very densely occupied, so a situation may well arise that a single-band router will not be able to provide the required speeds and coverage. At the same time, the user has no way to solve this problem, except to switch to the 5 GHz band or install an access point in each room, which leads to a significant increase in the cost of the solution (not to mention the fact that 5 GHz is also rare for low-cost clients ). This is perhaps the most significant point that you should pay attention to in the budget segment. Note that improving the antennas or increasing the power of your router, as well as replacing it with another (single-band) router, unfortunately, may not provide any significant advantage in this situation.

Keenetic Start II uses a dual antenna configuration, which gives a maximum connection speed of 300 Mbps. However, many inexpensive smartphones and tablets will only be able to connect at 65 or 72 Mbps due to the presence of only one built-in antenna and the lack of “wide channel” support, and of course this is not the fault of the router. Let us add to this that real speed usually half the connection speed and 100 Mbps router ports and the results presented in the following graph will not surprise us.

With a good Asus PCE-AC68 adapter, which will obviously not be used with this router in practice, you can get 80-90 Mbps, and with an inexpensive carrier smartphone - about 30-50 Mbps. The test was conducted at a distance of about four meters line of sight in one room.

The last performance test we ran with this device was the speed of the built-in PPTP server. It allows (in the presence of a "white" address from the provider) to implement a secure remote access to your local network from almost any type of client equipment. The graph shows the results averaged over the scenarios of receiving, transmitting and full duplex data exchange.

When using MPPE, the router provides about 30 Mbps, but if it suits the option without encryption, then the speed will be 70 Mbps or more, depending on the type of Internet connection.

Conclusion

The Zyxel Keenetic Start II router is a budget segment model that is interesting for its software and a fairly fast hardware platform. The device has a traditional case design with the ability to mount on the wall. Please note that the router is positioned not only as an addition to the current line, but also as a universal inexpensive device that can act as a router for wireless clients, and be an access point or repeater. Thus, the installation of only two network ports is just a feature of this model. Having a 2.4GHz-only access point is to be expected in this segment, and its performance is highly dependent on the radio environment at the place of use. At the same time, the router is equipped fast processor, which is able to handle routing at speeds up to and including 100 Mbps with any type of connection. The embedded software supports the latest technologies and standards in our market, and also has many additional features, of which, first of all, cloud access, the udpxy service, SkyDNS and Yandex.DNS support, bandwidth management, VPN servers and alternative modes of operation are of interest.

By the way, it is worth noting that they recently switched to a similar hardware platform Keenetic Lite III (about 1900 rubles) and Keenetic 4G III (about 2300 rubles), which now have revision B. So the performance test results presented in this material will be true for them as well.