The writing speed to a USB flash drive drops. Increasing the speed of file transfer to a flash drive
Modern USB drives are one of the most popular external storage media. The speed of writing and reading data also plays an important role in this. However, capacious but slow-running flash drives are not very convenient, so today we will tell you by what methods you can increase the speed of a flash drive.
The first thing to note is the reasons why the speed of a flash drive may decrease. These include:
- NAND wear;
- mismatch of USB input and output connector standards;
- file system problems;
- incorrectly configured BIOS;
- viral infection.
Unfortunately, it is impossible to correct the situation with worn-out chips - the best way is to copy the data from such a flash drive, purchase a new one and transfer the information to it. It is also worth considering the origin of such a drive - flash drives from little-known manufacturers from China may turn out to be of low quality with a very short service life. You can try to eliminate the remaining reasons described on your own.
Method 1: Checking for viral infection and eliminating it
Viruses are the most common reason flash drive slowdown. Most types of malware create a bunch of small hidden files on the flash drive, which causes the speed of access to normal data to be significantly reduced. To solve the problem once and for all, you should clean the flash drive from existing viruses and protect against subsequent infection.
Method 2: Connecting a flash drive to a faster port
Nowadays, the USB 1.1 standard, adopted almost 20 years ago, is still widespread. It provides very low speed data transfer, which makes the flash drive seem to be working slowly. As a rule, Windows reports that the drive is connected to a slow connector.
Message about slow work can also be obtained by connecting a USB 3.0 flash drive to the most common USB 2.0 now. In this case, the recommendations are the same. If all the connectors on your PC or laptop are standard 2.0, then the only solution to the problem is to update hardware. However, some motherboards (both desktop and laptop) do not support USB 3.0 at the hardware level.
Method 3: Changing the file system
Method 4: Changing settings for working with a flash drive
In modern Windows options The USB storage device is operating in quick removal, which provides certain advantages for data safety, but also slows down the speed of access to it. The mode can be switched.
![](https://i2.wp.com/lumpics.ru/wp-content/uploads/2018/03/Otkryit-Pusk-Moy-Kompyuter-Svoystva-dlya-izmeneniya-skorosti-fleshki.png)
The only drawback of this method is the dependence of the flash drive on "Safe removal". However, for most users, using this shutdown option is rather the norm, so this drawback can be neglected.
Method 5: Changing the BIOS Configuration
Flash drives have been around for a long time, and modern PCs and laptops are not always compatible with older flash drives. The BIOS has a corresponding setting, which is useless for modern drives and only slows down access to them. You can disable this setting like this:
![](https://i1.wp.com/lumpics.ru/wp-content/uploads/2018/03/Otklyuchenie-Legacy-USB-Support-dlya-uskoreniya-rabotyi-fleshki.png)
We have looked at the most common reasons for a drop in the speed of flash drives and solutions to this problem. However, if you have any other options, we'd love to hear them in the comments.
How to solve the problem with slow data copying to a flash drive?
Let's look at the common causes of this problem and talk about ways to solve it.
1. Flash drive performance
If everything is in order with the computer, the culprit of the slow process of transferring files to the flash drive is, accordingly, the latter. Budget flash drives, as a rule, cannot boast of impressive data writing speed. And the speed is 5-7 Mb/s with the interface USB connections 2.0 may be commonplace for those. You can test the data writing speed of a flash drive using Windows speed testing programs hard drives, in particular, through the popular CrystalDiskMark utility. You should not expect more speed from the flash drive tests than it will show in reality.
2. Computer USB ports
A USB 3.0 flash drive purchased with the expectation of faster data recording will work exactly the same as a USB 2.0 flash drive, only if this interface is supported by the computer, and USB 3.0 is not. The flash drive will limit the speed of the port. To get performance when copying data USB interface 3.0, the computer's USB ports must be equipped with it. The same applies to the situation when a USB 3.0 or 2.0 drive is connected to USB port 1.0. Windows, as a rule, immediately reports that the flash drive is connected to a low-speed USB 1.0 port system notification: They say this device can work faster if it is connected to a USB 2.0 port.
If data is slowly copied to a flash drive that is connected to a USB port on the front panel of the PC case, you can test its speed when connected to USB ports motherboard behind the body. It may be that the front panel of the case has USB ports 2.0 or 1.0, while the motherboard ports provide USB 3.0 or 2.0 interfaces.
Just like USB ports, which limit the speed of data writing, USB extenders can limit the speed of copying files. If a USB extender provides a USB 2.0 interface, its maximum bandwidth will limit the speed of the USB 3.0 interface of the flash drive and the computer’s USB port.
3. Weak computer hardware
On old or budget models computers, slow data writing to a flash drive may be due to weak hardware, in particular, small volume random access memory or slow hard drive. In this case, only upgrading your computer will help.
4. Drivers
Slow copying of data to a flash drive may be a consequence of incorrectly installed USB drivers. In this case, you can either update the motherboard drivers or reinstall the USB controller drivers. You can update motherboard drivers manually by downloading the necessary installers from the official website of the board or laptop, or you can entrust this task to special programs - driver installation managers. Among them: DriverMax, Auslogics Driver Updater, SlimDrivers, Advanced Driver Updater, etc.
To reinstall USB controller drivers, open the manager Windows devices, expand the “USB Controllers” branch and use the “Delete” option in context menu For each device in the list, remove its driver.
USB controller drivers will be installed automatically.
5. BIOS settings
In some cases, the slow speed of writing data to a flash drive may be a consequence of limiting the speed of USB ports in the BIOS settings. Such a limitation should be looked for, as a rule, in the advanced section BIOS settings"Advanced". If the “USB 2.0 Controller Mode” parameter is set to “Low-speed”, it needs to be changed to “Hi-speed”.
6. How to speed up writing data to a flash drive using software
If the cause of the problem lies in the low data writing speed of the flash drive itself, unfortunately, it will not be possible to significantly speed up the process of copying files to it. Even if we have a powerful computer. By software The file writing speed can be increased only slightly.
If you need to copy several small files to a flash drive, it is better to combine them into one archive file. And place this archive file on the flash drive. One hefty file will be copied faster than a lot of small ones. By the way, when copying small files, even high-performance USB drives can “sag.”
You can slightly speed up the transfer of files to a flash drive using special programs that are superior to standard tools Windows copy some share of performance due to its own data copying algorithms. One of these is WinMend File Copy, it can be downloaded for free from the creators’ website www.winmend.com/file-copy.
WinMend File Copy has a Russian-language interface, supports batch copying of files, setting up a buffer, as well as resuming data transfer from the point where it was broken.
When a user starts copying files to a flash drive, you can sometimes notice that the copying speed is quite low. In modern versions of Windows, it is usually shown as a graph and a numeric value. My speed usually reaches up to 6-7 Mb/s, and often jumps up and down. If there are problems, the speed may not be higher than 600 Kb/s, or somewhere in these values. For a normal flash drive, this indicator is unacceptable.
Let's look at the reasons for this phenomenon and try to figure out a solution to the problem.
Flash drive properties
When using a flash drive purchased for 200 rubles, you will not see high read and write speeds. This suggests that no matter what port you use on your computer, the increase may not occur. You can try using the program and check the maximum speed of the flash drive. It can be used to test hard drives and SSDs. The results will show exactly the maximum speed, which may differ greatly from what is written on the box. You shouldn't count on more.
Using high speed USB ports
If your laptop has a couple of USB 3.0 ports, then you should definitely use them. Typically, if you connect a device to a low-speed port, the system notifies you with a notification. If you connected a flash drive that has USB capabilities 3.0 to port 2.0, then you should not expect fast speeds.
In case of desktop computer, you can try connecting the USB flash drive to the rear panel of the system unit.
Also, the extender can limit the copying speed. The longer it is, the lower the speed.
Poor computer performance
If you are still using old equipment that is 7-8 years old, and the characteristics of the RAM and hard drive leave much to be desired, then only upgrading your PC will help increase the speed of reading and writing on a flash drive.
Crooked drivers
If you just inserted a brand new flash drive, the installation of controller drivers will begin immediately. If they don't line up correctly, expect slow read speeds. In this case, the only option would be .
You also need to update your system board drivers if you haven't already. You can download what you need from the official website of your board manufacturer, or using special programs such as DriverMax, DriverPack Solution or SlimDrivers.
To reinstall USB controller drivers, you need to go to the device manager. This can be done as follows: right-click on the Start menu and select the corresponding item. You can also press Win+R and enter the command devmgmt.msc.
Find the “USB Controllers” section, open it and remove the drivers for the following devices – "Root USB Hub" And "Extensible Host Controller...".
After deleting, click the “Action” tab at the top and select the item "Update hardware configuration".
Removed drivers should install automatically.
Programs to increase the read/write speed of flash drives
If you have a good computer with performance characteristics, but with a flash drive that has low copy performance, you are unlikely to be able to greatly increase the speed by using utilities.
If you copy many small files, then in order for them to be copied many times faster, you need to place them in an archive.
The program will help to slightly increase the copying process. Free and with simple interface it will help you improve your copying speed a little. If copying fails, you can continue from where you left off.
![](https://i2.wp.com/computerinfo.ru/wp-content/uploads/2017/01/WinMend-File-Copy.jpg)
OK it's all over Now. Maybe you have other options for answering the question why files are copied to a flash drive slowly?
Question: The process of copying to a flash drive drops to 0
When copying to a flash card with a usb 2.0 connector, via a laptop with USB connectors 3.0 something unknown is happening. Moreover, this does not happen with all flash drives 2.0. The copying process starts normally, but after copying a small volume, the speed drops to 0 and copying does not continue. I formatted the flash drive in all formats, enabled/disabled caching, tried everything file managers and programs for copying. I repeat that this does not happen with all 2.0 flash drives; I have three of them. Two work fine, with 3 there are problems like this and with some flash drives on which they asked to send something.
Answer: Novito, remove all the firewood on the USB and reboot
Question: In the office. network on one computer the Internet disappears when copying files from a second computer to a third. Doesn't that happen?
There is a small office network, about 10 computers and one as a file hosting service. Everything is on Win 7.
Unexpectedly, on one of the computers (Let’s call it conventionally A) the Internet is cut off, while the internal network continues to work without problems. Network icon without exclamation mark. Ping to Yandex writes “interval exceeded...”, but occasionally packets pass through.
After much experimentation, it turns out that if on another computer (let’s call it B) or third (let's call it IN) copy something from a file hosting service (let's call it G), then during the copying process on the computer A The Internet disappears. As soon as the copying is completed, the Internet appears.
Moreover, if you copy something from the File Sharing Service on other computers ( D, E, F, Z, I...), then the Internet on computer A does not disappear.
All computers are connected by an unmanaged gigabit switch
All this is controlled by the old reliable Router/Firewall.
Some computers are connected directly to the GS116 switch, and some are connected to the second GS608 switch, which, in turn, is connected to the first.
The network diagram is attached.
I’ll immediately answer possible assumptions: IP and MAC addresses on computers are naturally different. On some IPs they are configured manually, on others they are received automatically. Network 192.168.1.1-254
All computers are connected by cables, not via Wi-Fi.
Another nuance. But maybe that's normal. The ping on the network increases to 20 ms if you download something from a file hosting service.
Answer:
Message from NoVoAo
Unexpectedly on one of the computers (Let's call it A)
Update your motherboard and network card drivers or temporarily replace (install) another one network card so as not to torment users. Call the wiring or re-press twisted pair on both sides, maybe the wire was frayed somewhere with a chair (stretch a new twisted pair or connect from another PC)
Question: After starting the game, the gpu is loaded at 99%, the game starts to produce 5fps and even after the completion the gpu does not drop
after starting the game, the gpu loads at 99%, the game starts to produce 5fps and even after the process is completed, the gpu does not drop, without the Internet the gpu is 0%
win7
i5-3470
gt 630 1gb
Answer: Thank you, it helped, it doesn’t load like that anymore!
Question: List of programs for flash drives
- ChipGenius v2.72(2009-02-25) - a utility for obtaining information about all connected USB devices. Shows VID&PID values. There is a built-in database that determines the model and manufacturer of the controller.
- CheckUDisk v5.0- a utility for obtaining information about all connected USB devices.
Shows the idVendor and idProduct values to determine the device's controller type.
It also shows speed, revision, serial number flash drive.
- UsbIDCheck(USB Bench - Faraday USB Test Utility) - a program for obtaining information about all connected USB devices. Shows the idVendor and idProduct values to determine the device's controller type. The list by which you can determine the device manufacturer is the usb.ids.txt file in the program folder.
- Flash Disk Utility v1.20- a program for quickly and completely formatting a flash drive, creating boot disk, data compression and password encryption, instructions in English.
- FlashNull- a utility for checking the functionality and maintenance of Flash memory (USB-Flash, IDE-Flash, SecureDigital, MMC,MemoryStick, SmartMedia, XD, CompactFlash, etc.). List of operations performed:
- Read test - checking the accessibility of each sector of the media (duplicates the functionality of regular HDD tests)
- Write test - checking the write capability of each sector of the media (duplicates the functionality of most HDD tests)
- Test of safety of recorded information - checking the correspondence of recorded and read information (similar to the functionality of memtest, but for flash drives).
- Saving an image of the device contents - sector-by-sector saving of all (or part) of the contents to a file. (similar to UNIX dd functionality).
- Loading an image into a device - sector-by-sector recording of an image into a device (similar to the dd functionality from UNIX).
Instructions in Russian.
- iCreate_iFormat_V1.32- utility for iCreate i5122, i5128, i5129 controllers. After installing the program, the working window appears and disappears, by inserting a flash drive you can format...
- MPTool V2.0(MXT6208+A MPTool V2.0) - a utility for restoring flash drives on the MXtronics MXT6208A controller. They help Chinese Kingstone flash drives and some Sony fakes.
- UmpTool v1.6.3- utility for flash recovery on Chipsbank CBM2090 controllers.
May be suitable for other CBM209X series controllers.
- USB Disk Storage(HP USB Disk Storage Format Tool v2.1.8) - utility for formatting and creating bootable usb Flash (NTFS, FAT, FAT32 supported).
- Dr. UFD v1.0.2.17(PQI Dr.UniFlashDisk 1.0.2.17) - proprietary utility for low-level flash formatting on PQI controllers. Supported Models:
- Card Drive Series
- Intelligent Drive Series
- Cool Drive Series
- Traveling Disk Series.
- EzRecover- utility USB recovery Flash, helps when the flash is detected as a Security Device, is not detected at all or shows 0Mb volume. In order for EzRecovery to see the flash drive, after starting the program and issuing an error message, you need to remove the flash drive and reinsert it again, and then everything is fine.
Attention! After using the program, all data will not be saved to the flash drive.
- FORMAT v30112- proprietary utility for PQI flash drives. Allows you to format, manage partitions, create hidden and password-protected partitions.
- JetFlash RecoveryTool v1.0.20- utility for recovery (repair) USB Flash Transcend.
Solving the problem when formatting Jetflash when the error "No JetFlash found!" appears
1. You need to enable showing hidden files (folder properties – view – show hidden files and folders).
2. Launch the mFormat utility.
3. Go to the Temp folder in your directory account(For example: Documents and Settings – Leon – Local Settings – Temp).
4. If everything is done correctly, the JFAPP folder should appear in Temp, in which the JFormat.exe file will be found.
5. By running JFormat.exe we bypass the “No JetFlash found!” message.
- mFormat - a proprietary utility from Transcend for formatting Jetflash
HP USB Disk Storage Format Tool 2.1.8 Freeware
---
A utility for formatting flash cards and flash drives (NTFS and FAT supported), as well as for creating bootable DOS disks. Works with devices via USB port 2.0.
LLFsetup.2.36.1181
This utility allows you to convert the file system of a flash drive without losing data.
Answer: some paid
programs:
Active UNDELETE 7.3.003 SE
Allows you to recover files that were accidentally or intentionally deleted, lost due to a system crash or crash, disk formatting, or the impact of a virus attack. Supported file systems: NTFS, FAT32, FAT16, NTFS5, NTFS+EFS; works with everyone operating systems Windows as well removable drives various types and types: SD, CF, SmartMedia, Memory Stick, ZIP, USB Flash Drive, USB Hard drives and many others.
Main features of the program:
creating a bootable CD/DVD with a "lite" version Windows Vista(WinPE 2.0) to recover data if it is impossible to boot from hard drive or connecting the damaged disk to another computer;
recovering deleted files from IDE/ATA/SATA/SCSI drives;
recovery of files from removable media (SmartMedia, Secure Digital, MemoryStick, etc.);
support for external ZIP drives and USB drives;
recovering files from deleted, damaged and formatted partitions;
support for large (more than 500 GB) hard drives;
support for FAT, FAT16, FAT32, NTFS, NTFS5, NTFS + EFS file systems;
support for long and localized file names;
recovery of compressed, fragmented and encrypted files on NTFS partitions;
scanning partitions, damaged by viruses or with a damaged MBR;
advanced file search by name/date/size/attributes/mask;
visual representation of file/directory recoverability;
opportunity preview recoverable files;
built-in HEX editor for viewing/editing any disk sector;
two types of disk scanning - quick and full;
restoring files to any location accessible by the OS (including on network drive);
the ability to connect to remote computers and scan/create disk images/restore remotely;
support for hardware and software RAID arrays;
simple and friendly interface;
support Drag and Drop;
Complete online help system.
GetDataBack for FAT and NTFS 4.00.2
One of the leading and well-known, not only in narrow circles, tools for data recovery from various media. The German program GetDataBack, with its inherent reliability and accuracy, will recover data even if the partition table and boot sector damaged, folders and files destroyed as a result of a virus attack, accidental formatting, overwriting, deletion, etc. Even if low-level formatting is performed or if the system itself no longer “sees” the disk, GetDataBack will still return your data to you.
A simple and absolutely safe for files, in read-copy-only mode, a three-step, individually customizable recovery system is used. Works with both long names and non-standard Unicode character sets, such as Japanese, Chinese, Korean, Russian, Greek, etc. GetDataBack returns data from hard drives (IDE, SCSI, SATA), dynamic drives, USB drives, floppy disks, disk images, partitions, Zip/Jaz disks, CF, Smart Media, SD flash cards, USB Flash Drives and iPod disks. Available separately for FAT and NTFS.
This program exists in two versions - GetDataBack FAT and GetDataBack NTFS, each of which only works with the mentioned file system type. The program interface is a typical step-by-step "Wizard". At the first stage, you have to choose the type of recovery - recovery of deleted files, recovery of data as a result of formatting/deleting a partition, recovery of “chaotically erased” data. In the next step, you specify the partition or area of the disk to search, and GetDataBack begins scanning. The process is slow, so one of the advantages of the program is the ability to save intermediate results at any stage of recovery. The program will show you the sections it found in the specified area. Finally, after selecting a partition, GetDataBack will list all the files found and allow you to restore the selected ones.
GetDataBack allows data recovery both on the computer on which the program is installed and on a remote one - for example, on any computer on the local network.
The following media types are supported:
hard disks with IDE, SCSI, SATA interfaces
USB drives
Firewire drives
separate sections
dynamic disks
floppy disks
disk images
Zip/Jaz drives
Compact Flash, Smart Media, Secure Digital cards
USB Flash drives, iPod drives
R-Studio 5.1.130005 Rus
R-Studio is a group of reliable, efficient and cost-effective utilities for recovering data from hard drives, as well as other devices - such as CDs, DVDs, floppy disks, USB drives, ZIP drives and flash memory devices (Compact Flash Card, Memory Sticks) . Based on the latest unique technology for media analysis and data processing, R-Studio is the most comprehensive software solution of the recovery utilities available on the market for file systems FAT12/16/32, NTFS, NTFS5 (created or modified in Windows 2000/XP/2003/Vista), Ext2FS/Ext3FS (file LINUX systems), as well as UFS1/UFS2 partitions (FreeBSD/OpenBSD/NetBSD/Solaris file systems). The program operates on both local and remote computers over a network, even if disk partitions have been formatted, damaged or deleted. The program's user-friendly interface gives the user absolute control over the data recovery process.
R-Studio utilities recover files
* Deleted outside the Recycle Bin or when the Recycle Bin was emptied;
* Deleted virus attack or computer power failure;
* After the partition with files has been reformatted, even to a partition with a different file system;
* When the partition structure on the hard disk has been changed or damaged. In this case, using the R-Studio program, you can scan HDD, find a deleted or damaged partition, and only then restore data from the found partition.
* From hard drives that have a large number of bad sectors. The R-Studio recovery program can first copy information and create an image of the whole disk or part of it, and only then work with the image file saved on another medium as with the original disk. This is especially useful and effective when the number of bad sectors on the disk is constantly growing, and the remaining information needs to be saved immediately.
New R-Studio capabilities
Different ways to present data. At R-Studio help data on the disk can be presented in accordance with the actual folder/file structure, and also organized by extension, time of Creation/Last Access/Change.
Organizing files. Found files and folders can be ordered by their original structure, extension, creation/modification time.
Expandable list of known file types. The user can add new signatures to the list of known file types.
Supports bulk file recovery. Recovery options can be applied to all recovered files.
Find/Mark dialog box. R-Studio allows you to find and mark all files that match the parameters specified in the Find/Mark dialog box.
Additional features Hexadecimal Editor. Added the ability to view files in ANSI and UNICODE encodings.
Support for new file systems. In addition to the FAT/NTFS/ExtFS2/ExtFS3/UFS1/UFS2 file systems, the new version of R-Studio supports the HFS and HFS+ file systems developed by Apple Computer for use on Mac OS computers.
Apple computer support. A new version R-Studio Emergency can be run from CD on Intel compatible Macintosh computers.
Support for Big Indian variant UFS.
APM support. APM (Apple Partition Map) is a partition map used to define the low-level organization of data on disks formatted on Macintosh rlt computers.
Supports various rare RAID configurations. It is possible to explicitly specify parameters such as block size and order, offsets, and even the number of interleaved blocks. Available visual editor to create a specific block order.
R-Studio Technical Portable has been added to the R-Studio Technical package. The Portable version runs from a USB storage device.
Compressed image format support. When creating a disk image or part of it, it can be compressed and split into several files for saving to CD/DVD/Flash Drive or FAT16/FAT32.
Features of R-Studio: 5.0
RAID 6 support, including Reed-Solomon and Vertical XOR. Supports custom RAID 6 configurations.
Advanced copying of objects. In addition to direct copying of any object visible in the Drives panel, controlled copying of partitions and hard drives is available with adjustable sizes and offsets.
64-bit and 32-bit support Windows versions. Under 64-bit Windows, R-Studio can overcome the 3 GB limit for a 32-bit application and use the full physical memory installed on a computer running 64-bit Windows. This greatly improves the performance of the program, especially when scanning large disks.
UFS Explorer Professional Recovery 3.15.3
UFS Explorer is a powerful, comprehensive and easy-to-use data access and recovery product. It is designed to provide simple way receiving your information.
With UFS Explorer you can read-only (non-destructively) access:
Partitions of various OS: Windows, Linux, BSD, Unix, Solaris, MacOS, SnapOS, Netware (FAT12, FAT16, FAT32, NTFS, NTFS5, Ext2, Ext3, ReiserFS, XFS, UFS, UFS2, HFS, HFS+, UDF, ISO9660, NWFS);
Various media: all Windows-defined PATA/SATA drives, SCSI drives, USB drives (flash cards, digital devices, external hard drives), CD/DVD, floppy and similar devices, RAID arrays (even disassembled);
Disk images of these media, as well as virtual disks created by virtualization products of various vendors: VMWare, Microsoft, Parallels.
Together with its alternative method of accessing information, UFS Explorer contains functions for recovering lost files after deletion, formatting, disk repartition, or virus attack.
The application is suitable even for data recovery professionals and provides complete tools for accessing data and recovering information.
KEY CONCEPTS:
Universal access: UFS Explorer is a product that allows you to not worry about the actual location of your data. It supports fast and secure access to most drives, including SCSI/SATA/PATA, USB drives, RAID arrays, virtual disks VMWare, Microsoft Virtual PC, Parallels Workstation, Bochs and regular disk and partition images.
Built-in support for most file systems makes data recovery very easy!
Data Recovery
Multiple levels of recovery: UFS Explorer allows you to quickly get the data you need.
UFS Explorer products use multiple levels of recovery, from direct file system reading to advanced heuristic analysis methods. This allows you to get results as efficiently as possible and in the shortest possible time.
If you have several operating systems on one computer, UFS Explorer makes information available regardless of the actual location and at the usual speed!
File lost or deleted? File system damaged? UFS Explorer will help you recover your data.
Data Recovery
Online recovery: You are an organization with a wide range of computer network? Of course, you care about reducing the risk of data loss on the workstations of your employees, and in case of loss, restoring it as soon as possible.
Using UFS Explorer, you can minimize downtime by quickly restoring information over the network instead of calling a specialist to the work site.
Files Undelete
Quick Undelete instead of lengthy scans: File deleted? UFS Explorer supports fast recovery with FAT and NTFS.
This gives very quick method restore a file if it is deleted from the Recycle Bin or deleted without the Recycle Bin.
If you have digital camera or MP3 player detected as a disk by Windows, with UFS Explorer you can restore deleted files without much difficulty directly from the device and copy it to your local drive.
RAID Recovery
RAID Recovery: Is your RAID array down due to drive or controller failure? Is it impossible to assemble an array after reconfiguration? UFS Explorer can help you virtually build your RAID 0, RAID 5, RAID 1+0 or simple JBOD RAID (or combinations) and recover information from there.
UFS Explorer can automatically reconstruct some RAIDs: You only need to specify the disks or disk images on which the RAID is located; Manual build mode is also supported.
Unlike some similar products, UFS Explorer collects virtually, so you can begin recovery immediately, without creating any large intermediate files.
Files Undelete
Batch mode access: Do you want to schedule file copying from an alternative file system or media? Would you like to periodically copy a locked log file for analysis? UFS Explorer has a version for command line- Batch Edition.
Based on specially prepared scripts, it can open any supported file system and copy any files from there.
The Batch edition works from the command line, and can also be built into a batch job.
Flashboot 1.4.0.157
One of best utilities to create a boot disk on a USB Flash Drive. The program is designed as a convenient step-by-step Wizard, offering 9 possible options for creating a bootable disk: a disk based on PE Builder or copies of an existing bootable CD, creating a disk using a floppy disk or based on disk images, creating an emergency password recovery disk (for Windows 2000/XP and Linux), etc. d.
Question: The writing and reading speed of Seagate ST2000DL003 drops sharply
Good afternoon
The problem is this:
There are 2 HDDs
both Seagate ST2000DL003, purchased at different times and in different stores
Used as HD video storage. The last time I connected it to a computer was 1 year ago.
Now I bought a 4 TB disk and wanted to merge all the videos onto it and a problem was discovered.
When copying, the speed begins to drop over time to 2 MB per second. Although most of it is copied at a speed of 60 MB/s. I checked the recording, the same thing, the recording speed starts at 120 MB, most of it goes to 50 MB and at some point drops to 2.
As I said, these are not small files. All files larger than 2 GB.
Copying from other drives works fine. I tried formatting, but it didn't help.
The firmware is up to date.
Here's a smatr
Help me figure out what's wrong!
Thank you very much!
Answer: And if you try to copy using it, what speeds will it show at the beginning and end of copying the file?
Question: The machine slows down when copying files
Good afternoon
I have a computer:
Quote:
Here is a full report on the hardware (made through AIDA Business Edition):
html:
txt:
It's good for everyone, but when turning to the propeller, it just creates terrible brakes. If, for example, you copy a 1.5GB file from C:\ to D:\ - then it starts “briskly” (the speed at first is, for example, 30 MB/s), then it copies in some jerks and eventually the speed or even drops to zero and then jumps up, or hangs around 3-5 Mb/s. If you are writing something big, then you can go have some tea because the brakes are such that it is impossible to work
Real-time antivirus is disabled, I think it is not in use.
I have suspicions that this is due to the specific server system Win 2012. My relatives refused to install it. At first I tried to install it in compatibility modes for seven and eight, in the end I set everything I could manually through Device Manager -> Right click on the element, “Update Driver Software”, and specified the folder with the firewood. Of the disk controllers, two were installed, but the rest show the driver version of 2006, maybe that’s the problem
What to do about it? Is it possible to somehow “deceive the firewood” so that they consider Win 2012 “Server Eight” (in fact, that’s what it is)?
upd.: if you look at the properties of this ATA Channel 0, you can find this:
Quote:
freedaw, thank you by the way for the good advice! I didn't think about it myself..
Helped a lot Ment69 from the oszone forum, and enabling the AHCI driver.
The speed has stopped “sagging” and hangs between 20-30 Mb/s and above a hundred, and finally it has stopped lagging!). and finally you can simultaneously copy files and do something else without a slideshow
I’ll leave it for Win 8 and 2012 (note that for other OSes the keys will be different, google it)
Question: Tell me what program can I use to reflash a flash drive? I can't find it in the parameters
Please give professional advice on how to restore a Chinese flash drive using the program Ameco MW6208E 8208 1.2.1.0 090928. (or some other). It seems that all the controller parameters and numbers are correct. But the program does not see the flash drive. I try to enter it manually, it gives an error after pressing apply.I don’t understand how to use it. The flash drive was pulled out of the port during copying (without safe removal). After that it says “Write protected” and is not formatted by any program. I tried both through the command line and through the registry - IT DID NOT HELP. I thought this program would help. So I applied to your forum. HELP! Thank you in advance. Volume -500 GB. Now the letter of the flash drive is not detected on Win7 (it simply says “disk drive”). Neither the size nor the drive letter. On the computer: Administration -> computer management -> disk management, the disk is visible (the size and it says that it is working ). On XP the flash drive is visible even with the letter. No matter what I did, the “disk is write protected” crashes! I thought I’d find a program based on the parameters. I think I found it, but it doesn’t “see” the flash drive! There is no information on the flash drive. You just need to format it !
Answer: Thank you, I read the topic, but there are a few nuances: firstly, I tried my flash drive on another radio and the same garbage. Second, I tried an 8 GB flash drive. in the root of which there were about 100 songs and in another folder with about 600 songs it works fine. Third, I tried another flash drive (though a microSD with an adapter) also 16 GB. and I uploaded it the same way as on mine and it works fine on my radio and on another one, and finally the fourth thing is when I upload 3 folders on mine with an average of 450 songs in each and when I pull it out of the laptop and immediately insert it in just a couple of seconds then in the first folder everything is fine, as many songs as needed, but the second and third folders are empty, when I check the size of the folders it’s a little less than 4GB. And when I check that the flash drive is busy, the properties say that it is full
Question: Heating of a USB 3.0 flash drive
Hello forum users! I have the following problem: I have a SanDisc Ultra Fit 32GB USB 3.0 flash drive; it’s literally a couple of days old (a gift for NY17, by the way, congratulations to everyone!!) and when writing to it, up to a certain point the speed is ~60Mb/s, and then it drops to 20-18Mb/s and the flash drive literally becomes fire when you try to pull your fingers out get burned. There is also an external screw, also 3.0, but the port block of course gets hot from it, but not so much. So the question itself is, is this a normal phenomenon or should we look for the cause before the flash drive melts, and is the drop in speed due to heating or not?
Answer: I have had a flash drive for 2 years now. When exchanging data it also gets quite hot, of course you won’t burn your hands, but the metal USB itself gets quite hot. Works stably. so you can exchange it in the store and see if this is normal for this flash drive.
Question: acer 5738z (jv50-mv) Freezes when reading from a USB flash drive
Freezes when reading from a USB flash drive, as well as from the built-in card reader. Moreover, in safe mode- reading is going well. At least I installed Windows from a flash drive. The south is a little warm. Other usb devices work fine.
Answer: Reinstalled the system. I installed 32-bit. And finally I found why it freezes. Files are normally written from a flash drive only when there is no video playback! If you put the video on playback, copying the file from the flash drive is paused. The flash drive just falls off. Sometimes the computer freezes. I can’t understand how video playback affects usb?