WinToHDD Install, reinstall and clone Windows. Quick reinstallation of Windows without data loss Where can I reinstall Windows
If you still think that installing an operating system is an occupation for computer masters, then you are seriously mistaken.
Using this guide, you will be able to install Windows 7, even if you are a novice PC user. So, let's get ready to start.
- Open "My computer" and see which section you have in this moment system installed.
Remember its size and name so that you can find it later desired volume when installing. - Collect in advance on a USB flash drive or other disk all the necessary drivers for a computer or laptop. If there is no driver disk, they can be downloaded from the official website of the hardware manufacturer. If you do not do this, then you risk being left without the Internet after installing a new system.
- What bit depth of windows 7 to choose -? Click « Control Panel -> System and Security -> System»
If your computer or laptop has more than 3 gigabytes installed random access memory, definitely worth installing the 64-bit version. In general, we recommend installing x86 only on weak or very outdated hardware in the 21st century yard, after all :). Please note that the drivers for the same device are different in them, in fact these are two different systems!
- Download the installation ISO image Windows 7:
What are these images?
These are original MSDN images downloaded from the official microsoft site. The only change is the ability to select the edition of the system during installation is unlocked. No files are affected, the system is not activated.
Other versions of Windows 7 images can be downloaded. - Prepare bootable flash drive with Windows 7. In this guide, we will install the system from a flash drive, because it is faster and easier. A similar instruction on how to create it can be found.
- Since during installation we will format the disk with the installed system, then everything important files that are stored on it, you must first copy to removable media or to another section hard drive. Remember that the files located on the desktop are also stored on the disk with the system. If you need them, be sure to move them to another place. When formatting, all previously installed programs will also be deleted, but this does not mean that they also need to be copied to flash drives and disks. Programs are easier to reinstall, so take care only of – photos, documents, music, etc.
Create a bootable flash drive with . Next, insert it into the usb port and change to BIOS-e motherboard board boot priority so that this flash drive is loaded first. If there are difficulties at this step - here detailed instructions. If you did everything right by changing the boot priority, then after exiting the BIOS and restarting the computer, the message “Press any key” will appear on the screen. Fulfill this requirement - press any key to start booting from the installation media.
You need to press the key only ONCE and only at this stage of the installation.
After pressing any key, a message will appear stating that Windows is loading files.
System installation
So, let's proceed directly to installing Windows 7. Wait until their extraction is completed, after which the installer's start window will appear on the screen. Congratulations, the hardest part is over!
- Choose your language, time format, and layout. Click "Further".
- Click on the big button "Install" to start the installation wizard.
- Read the license terms and accept them.
- Choose a full installation (the update does not suit us).
- After launch complete installation the partition selection screen appears. The installer window will have several sections:
The first usually reserved by the system (it stores recovery files). It weighs 100 MB and you don't need to touch it. Second is system - that is, Windows files are stored on it. A new system is being installed on it. Third section is file. User data is stored here, which remains intact even after the transfer. Windows installation.
There may be other options: for example, there is no system reserved partition or there is no volume with user files. In any case, you need the partition on which the previous system already stood - for good reason, when preparing for installation, we advised you to look and remember its size.
If for some reason you still have one partition, the volume of which exceeds 250 GB, then it is better to immediately divide the disk into two volumes: one for Windows and programs (about 50-100 GB), the second for personal files. To do this, using the "Disk Setup" tool, delete the existing partition and first create the first volume ("Create" - specify the volume - "Apply"), and then the second.Created volumes should be named "Section 1", "Section 2". There should be no unallocated space - the system simply will not see it.
So, you have at least two partitions, one of which is dedicated to operating system files. If it is not just created, but has already been previously, then it must be formatted by deleting all data.
Click on the link "Disk Setup", highlight a section and press "Format". When formatting, all files from the system partition will be deleted (that is, the values in the "Full size" and "Free" columns will become the same). This is exactly what we were striving for. To start a clean install, click "Further", checking again that the partition that you selected for the system is selected.
- We wait. After selecting a partition and starting the installation, a window will appear on the screen in which you can see the unpacking process Windows files 7 and their entries on HDD. While you can relax - you won’t have to do anything for 15-25 minutes.
During this installation time, the computer will restart several times. After the installation is complete, you need to specify some parameters for the system.
- Enter computer name Computer name The computer name is how your computer will be called on the local network. and username. It is advisable to use Latin characters instead of Russian ones, this will help to avoid problems with some programs in the future.
- You can optionally set an administrator password, but this is not required. If you set a password, you will need to enter it every time you start your computer or laptop. We will leave the field empty for now, you can “password” the account later.
- Enter your activation key if you have one. If there is no key, uncheck "Automatically activate" and skip the step by clicking "Further".
- Specify windows settings– it’s better to choose the recommended settings when you know better new system, customize it your way.
After selecting all the necessary parameters, a working screen will appear on the screen. Windows table 7. You can start your acquaintance with the system, but first reboot the computer and go into the BIOS again - here you need to change the boot priority back, putting the hard drive in first place.
- Turn on automatic update system and wait for the process to finish. Security updates will install most drivers. If there is no Internet, you can use the program to install drivers .
![](https://i1.wp.com/kak-pereustanovit-windows.ru/wp-content/uploads/2018/09/vybor_versii_windows_7.jpg)
Attention!
Note: choose the version of Windows for which you have an activation key (you will enter it at the final stage of installation). If there is no key, read the instructions after installation.
The instruction turned out to be quite impressive in volume, but now you know the basic nuances when installing Windows 7 and you can easily do it yourself. Carefully follow the above recommendations and the installation will definitely be successful.
Install OS from it. If you do not have such an opportunity or you want to try out the operating system, you can download a disk image from the official site. This article will tell you how to install it yourself and not screw it up.
Most of windows 7 on the internet is not licensedWho seeks will always find
To get the maximum free from the Internet, you first need to find where to download. There are a lot of safe sites on the Internet. The only thing is that most of these versions are not licensed, and therefore, after 30 days the system will require an activation key. On the Internet you can find a cracked OS that has a built-in tablet and does not require activation.
Maximum windows 7 opens up wide opportunities for the user. This is a productive and advanced version. It offers additional features, an encryption system, a multilingual user interface, and more. Keep this in mind, as some highly specialized programs require exactly the "maximum" edition of the OS.
WATCH VIDEO
OS installation methods: flash drive and others
The most common way is. This method can be used regardless of whether there is a disk drive or not. So, to reinstall windows 7 from a USB flash drive, we create a bootable drive. If you already have it, from friends or acquaintances, then the matter is small: restart the computer and wait for the automatic installation of the OS to begin.
If you only have a disk image with installation files and an empty flash drive, you will have to create a . There are many options, but we will go the simple way. Download one of the programs:
- UltraISO
- Windows 7
- WinSetupFromUSB
We throw off the downloaded ISO image on a flash drive. Easier USB/DVD Download Tool. We indicate the location of the image on the PC and click "Next". After a couple of seconds, the installation flash drive is ready.
First you need to mount the image Microsoft Windows 7 per flash driveInstalling windows 7 from a flash drive through the BIOS or boot menu is a simple process. To configure the BIOS, you need to know the hot keys to enter this mode. They are different for every computer model. Therefore, first rummage on the Internet and find the right combination. After turning on the PC, press the keys and a menu will open in front of you:
- We are looking for the “Startup Settings” section (called Boot” - “Boot Device Priority)
- Select a flash drive as the first boot device
- Press F10 to exit BIOS
- Computer restarts and starts automatic installation
The problem with this method is that then you have to go back into BIOS and change the startup settings back.
We enter the BIOS when the computer startsAnother method is to launch the boot menu. It also needs a special button: Del, Esc, F2, or others. In the dialog box, you immediately change the launch options, and the OS installation begins. Moreover, the parameters automatically return to the standard ones. You can install windows 7 through bios not only using a USB flash drive, but also installation disk. We will not consider installing Windows from a disk, since the process is no different from the one described above, it just does not require presetting carrier. The disc must be inserted into the drive and restart the PC. If you can’t install windows 7 on your computer, you need to go back to the BIOS or boot menu and follow the same steps.
enter the boot menu - press the buttons: Del, Esc, F2 or others.HDD
Few people know, but you can install windows 7 from your hard drive. This option is suitable for those who want to install windows without a disk or flash drive. This method is very simple in that you do not have to create an installation flash drive or delve into the BIOS. To start the required process, we need:
- OS ISO image
- Any imaging program (Daemon Tools)
- To work with boot record May need EasyBCD
After you have found an image with the OS on the Internet, you need to prepare the hard drive. To do this, you need to create a partition under the OS on the HDD:
After you have found an image with the OS on the Internet, you need to prepare the hard drive- "Start" - "Computer" (right-click) - "Management" (run as administrator)
- "Disk Management"
- Depending on how many disks your PC has, we will need to work NOT with the system one.
- We do not touch the system disk, select the second one and right-click "Compress Volume".
- We determine the volume we need - 25 GB is enough - “Compress”
- The window will show new disk but it's not ready yet. Right-click on the new part and select "Create a simple volume"
- Here you can give a name to the disk, for example, D and click OK. We are waiting for formatting. Ready.
There are also other ways to make a partition on a disk using third-party programs.
So, when the HDD is ready to work, download the above programs and install. Using Daemon Tools, you need to unpack the image and with virtual disk transfer the installation files to the partition D we created.
Using Daemon Tools, you need to unpack the image and transfer the installation files from the virtual diskRun EasyBCD as administrator. In the Add New Entry menu, select the WinPE tab and in the Name field name our system (whatever you want). Below we indicate the path to the boot.wim file, which lies in the sources folder on the disk we created earlier. Click Add Entry. The HDD is ready for installation.
Network download
There is an installation of windows 7 over the network. This method is very complex and time consuming. You will need the Windows Automated Installation Kit (AIK) for Windows 7, a distribution with Windows 7 and DHCP, and TFTP servers. If you do not understand this, then there is no point in delving into this topic. It is better to use one of the above OS installation methods.
Installation process
If you decide to install Windows 7 from the Internet for free, it remains to follow the step-by-step instructions and make sure that the data is entered correctly. Regardless of the method you want to use, after turning on the computer, windows will automatically install:
Installing Windows 7 takes certain time, depending on the power of your computer- Choose a language
- We accept the terms of the license agreement
- Select "Full installation"
- It is recommended to format all drives
- The PC will restart and continue with the installation
- Give and set a password
- In the activation window, click "Next"
- "Use recommended settings"
- Setting the date and time
- We search for a home network
Setting up Windows 7 after installation ends here.
Further work with the operating system
If it didn’t start on windows 7, you’ll have to look the right software. Program . Programs for installing drivers on windows 7 are useful if you do not have an installation disk with all the necessary start-up firewood.
After reinstalling the OS, you need to download the drivers for the video card so that the images are correct, the drivers for the sound video card, necessary programs for windows 7, type Microsoft Office and browser.
System errors
Problems may occur during OS installation. One of the main ones is the place from where you are trying to download windows 7 for free. Initially, the installation files may be incorrect, and therefore there will be problems during installation. A common error when the necessary drivers were not found when installing windows 7. This error is due to the presence on modern computers two USB connectors 2.0 and 3.0. You can fix this problem by moving the flash drive from one slot to another.
A common error when the necessary drivers are not found when installing windows 7Often users are faced with the fact that windows 7 is not installed on the hard drive. This issue is related to creation errors bootable media. The reason may be user inattention. Some drives do not read all discs, especially older models. Also, the computer can independently protect the system from pirated copies, therefore, in time . If you still have problems, it is better to contact the service center.
In the process, you will format local disk, which contains the current version of Windows. Simply put, before installing a new system there, you will have to erase all old data from it. The contents of the remaining disks should remain unchanged. But it is better to play it safe and first copy to the cloud or to physical media absolutely all the data from the computer that you are afraid of losing.
If your computer has paid programs, do not forget to read the rules for working with licenses when reinstalling Windows in their documentation, otherwise you may lose them.
2. Create a boot disk or flash drive
If you want to install/reinstall a licensed version of Windows, make sure you have the appropriate activation key. Even if you are already using an activated system and just want to install the same version again, old key activation might come in handy again.
- If you already have a bootable flash drive or disc with the version of Windows you are about to install, you can skip to step 3. otherwise you need to download the Windows image from the Internet and burn it to any of the listed media according to the instructions below.
- Decide on the version of Windows you'll be installing and make sure your computer meets its system requirements. This information can be found on the official Microsoft website or on the disc with the purchased Windows. Don't forget to also check that your computer supports bit depth. new version: 32 or 64 bits. In order not to miscalculate, you can install a version with the same bitness as your current version of Windows.
- To create a bootable USB flash drive with any way Windows found on the Web, you can use the program (with UEFI support) and proceed to step 3.
Below I will show you how to create boot disk or a flash drive with the official image of the system using the example of Windows 10.
![](https://i0.wp.com/cdn.lifehacker.ru/wp-content/uploads/2016/09/3_1474872395.jpg)
3. Boot the system from a disk or flash drive
Now that you have the physical media with the desired Windows image, you need to go into the special BIOS software environment and select the disk or USB flash drive as the boot source here.
![](https://i2.wp.com/cdn.lifehacker.ru/wp-content/uploads/2016/09/3_1474872561.jpg)
Perhaps instead of the classic BIOS you will see a more modern one GUI. Moreover, even in various old versions BIOS settings may differ. But in any case, the procedure will be approximately the same: go to the boot menu, select the desired media as the source and save the changes.
After that, the computer should boot from the selected disk or flash drive.
4. Run the installation wizard
If you did everything correctly, the Windows setup wizard will appear on the screen. Further actions do not exceed the complexity of installing an ordinary office program. You just have to follow the prompts of the system and wait until the files are unpacked. Unless you have to select a local drive to install the operating system and format it.
Also, be ready to enter your activation key during the process. But if you reinstall an already activated one on your Windows computer 10, then the step with the key can be skipped.
After installation is complete, your computer should boot into normal operating mode.
5. Install drivers
![](https://i1.wp.com/cdn.lifehacker.ru/wp-content/uploads/2016/10/BoHjn6fd5Ks_1569424106-e1569424118275.jpg)
Modern Windows versions automatically load drivers. But if, after reinstalling the system, you notice that the video card, speakers, or anything else is not working correctly, you can use the driver autoload utility. Suitable, for example, free Driver Booster.
After completing all of the above, you can get to work. The computer must be ready.
Unlike Windows XP (Windows XP), reinstalling or windows update 7 (Windows 7) runs over the installed operating system without deleting the system partition and formatting the disk. Reinstallation preserves user files and preferences, and installed programs and the parameters that were assigned to them.
To reinstall Windows 7 (Windows 7) we need:
1) installation disk
2) key
3) enough free space under the system partition (no less than the Users folder in its root)
Let's move on to the reinstallation process itself. You must first sign in to Windows.
To start reinstalling Windows 7, you can use the installation disk or open the item in the control panel "Backup and restore". At the bottom of the window that opens, there is a link "Restore system settings or your computer", then - "Advanced recovery methods". A window will open with two recovery methods:
1) restore the system from a pre-created image using the backup function
The clear interface of Windows 7 allows you to understand even a beginner. It is recommended that you create a system image the first time you use the OS.
Backup and Restore -> "Archive" button
2) reinstalling the system, from the installation disk
Immediately before installation, you need to do backup files.
We go: Control Panel -> Recovery -> Reinstall Windows (requires a Windows installation disk) and follow the instructions of the wizard.
But it is better to use another method - put the installation disk and run setup.exe from it, and then click the Install button in the window that opens.
Here Windows 7 will prompt you to download Latest updates, it would be better to install an updated system. An Internet connection is required.
Updates are downloading:
If you want to save all user settings and files, as well as installed programs, then you should use the item "Update" is an installation on top existing system. Please note that all system parameters (for example, service configuration) are reset - brought to the standard ones, as in new installation Windows.
The update uses the data transfer tool. It saves:
- custom files and folders
- audio files, images and video files
- Accounts and user settings
- program settings
- Internet options and files in the Favorites folder
- options Email
- contacts and messages
All files are saved on the same partition where it is installed operating system. During the reinstallation, a number of folders are created, one of which is where Easy Transfer places these files.
Then all this data is restored to installed system, and temporary folders are deleted. But before you see the desktop, you will need to go through the standard user settings process called OOBE (Out of Box Experience) - enter the product key, set the language and regional settings, etc. After the upgrade is completed, you will have a completely restored system , which saved your files, user preferences and settings for installed programs.
Full installation (advanced options)- this is clean install with formatting the system partition, or installation on another hard disk partition.