home > A computer > Download Windows 10 error fix. Checking RAM

Download Windows 10 error fix. Checking RAM

Often, a computer user is faced with the fact that his PC starts to work slowly. It begins to “slow down” the launch and operation of some programs, although the window with the message and error code did not pop up on the monitor. This requires checking Windows 10 for errors. Do not immediately "demolish" and reinstall the operating system. After all, the reason may lie in a change or damage system files.

Often this can occur due to the influence of viruses and other malware, incorrect shutdown of the computer after work, and other problems. It should be borne in mind that not all errors can be displayed on the screen, they imperceptibly accumulate, interfering with the operation of the PC. In order to identify and eliminate them, it is necessary to periodically carry out a full-fledged Windows check 10 for mistakes. You also need to analyze the integrity of the system, registry, video card, hard drive and other vital elements of the computer.

Checking your hard drive for Windows 10 errors

The hard disk and its bad sectors in Windows 10 can be mainly checked in the explorer interface and through the command line. Moreover, the installation of any programs during this process is not required.

Through "Conductor". This check is primary and runs Windows 10 in automatic mode. Since it takes about 60 minutes in time, it is better to run disk defragmentation at night, since it checks all disks. AT "Explorer"(right mouse button) open it on one of the disks "Properties", then go to "Service" with pressing "Optimize".
Using the command line. Using this method, you cannot restore order on the hard drive, as with defragmentation, but you can quickly recover data from bad sectors. This action opens Command line(Administrator) and enter the chkdsk C: / F / R command into it (F - automatic correction of problems found, R - attempt to restore data).

After checking drive C, you need to check all other drives for errors, replacing only the designation letter.

Checking RAM for Windows 10 errors

You can diagnose memory errors using the built-in Windows utility. To launch it, you need to take the following steps:

After the test is completed, the PC will restart and the monitor after logging in will display information on checking the memory for Windows 10 errors. To see the results (MemoryDiagnostics-Results) need to log in "Windows Logs" - "System".

Checking the Windows 10 registry for errors

If the error in the registry is not eliminated in time, then the consequences of its “life” in it can turn into a blue screen of death for the computer, or even a complete failure of the system to start. Verify Windows registry 10 for errors can be through:

Through the built-in utility in Windows 10, but it is more suitable for identifying critical errors in the registry. We launch Command Prompt (Admin)- entering the command scanreg / fix - Enter.
Through the computer cleaning program CCleaner. After starting the utility, you need to go to the "Registry" section in it, then "Search for problems" and after checking, click on "Fix selected ...". Use "Fix Marked" to troubleshoot the registry.

Checking ssd disk for errors Windows 10

An SSD drive for errors can be checked using the functionality of some relevant programs that will conduct a complete test. Among them, attention should be paid to:

It needs to be downloaded, installed and run. It will scan the hard drive and give you the test result. In the main menu, you need to use the tab "Service".
This free utility will reveal all the problems, because it is specially designed to analyze the health of the SSD drive.

In addition to these programs, you can also use SSD Life, DiskCheckup and HDDScan.

Checking Windows 10 system and system files for errors

Systemic Windows files 10 are checked for errors using SFC.exe and DISM.exe . Let's consider both options.

sfc.exe . To run the command, you need to enter command line on behalf of administrator and type sfc /scannow - Enter. Next, a corresponding check will take place, during which errors in system files will be automatically corrected. If you want to analyze a specific system file, use the command sfc /scanfile=”path to file.
DISM.exe . Through Command Prompt (Administrator) you need to run the following commands in turn dism /Online /Cleanup-Image /CheckHealth, dism /Online /Cleanup-Image /ScanHealth, dism /Online /Cleanup-Image /RestoreHealth , each of which takes a certain period of time when checking and troubleshooting system files.

Checking the video card for Windows 10 errors

To check the video card for Windows 10 errors, it is recommended to take these steps.

Press Win + R - enter the command dxdiag– Enter.
Will pop up on the monitor “DirectX Diagnostic Tool”(you will be prompted to check the drivers), click on "Yes" and then click on "Screen".
If you see in the window "Note" list of identified errors, then they need to be eliminated and then the video card will have high performance. It should be borne in mind that a list of errors should not be present in this field, because otherwise these problems “slow down” the functionality of the video card.

You also need to know that this video card test was performed without load. Therefore, it is necessary to do an additional check of the computer element, but already with a load.

To do this, you can use the benchmark for the graphics card furmark. It is completely free and very easy to download from the official website of the developer. All procedures for checking a video card are carried out after it has been visual inspection for external damage.

Operability of the operating room Windows systems 10 depends on many factors and reasons. To avoid many malfunctions in it, which lead to disastrous results, it is always necessary to carry out a full-fledged diagnosis on time.

With the help of many built-in and downloaded utilities (besides, they are completely free), you can identify and eliminate serious errors in systems at an early stage. This can be completely done on your own, without resorting to the services of an expensive specialist from a computer service center.

If you are tired of constant crashes from the system, errors and other “troubles” with your computer during work, then you need to more often diagnose its elements to identify very serious problems.

After all, some of them may be completely invisible in work, but layering one on top of the other, these errors can cause great harm to your computer or laptop.

Not all errors are expressed in windows that appear on the desktop and the inability to perform any action. Much more often, they imperceptibly accumulate on your computer and gradually slow down its work. Periodically check the device for possible errors, and not only the system, but also HDD, and registry. All the methods described below include the automatic correction of the faults found.

How to check the system for integrity and errors

As a result of incorrect shutdown of the computer, exposure to viruses and other problematic situations, system files may be damaged or changed. The consequences of this, as a rule, are expressed in problems at startup. individual programs or turning on the computer, but sometimes they may not be visible to the user. Scanning the system for integrity is the first thing we recommend doing when you encounter problems with Windows 10.

Through the sfc command

This is the main way to check the integrity of the operating system. It is intended for cases with problems with the performance of the computer. Through the sfc command, only a superficial analysis is carried out, with the help of which it will not be possible to find and fix all possible errors. However, this method is quite fast and is ideal for preventive computer scans. A deeper analysis is possible through the DISM utility, which is described below.

The sfc command cannot fix errors in files that are currently in use by the system. If you receive a notification about such failures, be sure to run the DISM utility.

Through the DISM utility

The DISM utility performs a full system scan for errors and integrity violations. The analysis launched by it lasts quite a long time, but it allows you to identify and correct all violations in the system. Internet is required for verification.

Before starting the utility, disable the antivirus and that's it. running programs and also try not to use the computer during the analysis.

Open command prompt as administrator and type dism /Online /Cleanup-Image /RestoreHealth.

For a complete analysis of the integrity of the system, enter the command dism /Online /Cleanup-Image /RestoreHealth at the command line

There are a few more commands of this utility that you may find useful:

dism /Online /Cleanup-Image /CheckHealth for information about the status and presence of damage to Windows components;
dism /Online /Cleanup-Image /ScanHealth to check the integrity and corruption of the component store.

How to check hard drive for errors

All data written to the computer is divided into small fragments, which are placed on sectors hard drive. During the operation of the computer, these sectors can be damaged. Bad sectors are hard disk "errors". When the hard drive tries to read information from a bad sector, the reading process "stops". The result of this is unjustified long inclusions computer and running some programs.

You cannot fix bad sectors, but you can prevent the hard drive from working with them. The process of finding and eliminating these sectors is called defragmentation. Even if no errors are found, as a result of defragmentation, the space on the hard disk will become more ordered, which will also speed up the process of reading information.

Through the "Explorer"

This is the main way to check the hard drive. Windows 10 should do it automatically, without the knowledge of the user, in order to keep the hard drive in order. Defragmentation will take you about an hour, so it's best to leave it overnight.

Through the "Control Panel" (storage diagnostics)

Many mistakenly believe that through the storage diagnostic utility, you can analyze the hard drive. Actually it is not. The storage diagnostic utility is indeed present on the hard drive, but it starts automatically, and you won't be able to do an analysis through it. In this way, you can only find out the results of the last hard disk status check.

If you just want to analyze, use the previous method, but instead of "Optimize" click "Analyze".

Through the command line

This method eliminates the restoration of order on the hard disk, which is performed during normal defragmentation. This makes the process much faster. Correcting errors in this way is recommended if you need to quickly recover information from bad sectors.

To check without using the Internet, use the chkdsk C: /F /R /offlinescanandfix command.

Via PowerShell

Windows PowerShell is a powerful new shell for the command line. She does the same as her predecessor, but has much more powers. PowerShell allows you to quickly and easily perform those actions that are difficult or impossible for a conventional command line. In our case, this will help to avoid the need to restart the computer to check the sectors in use.

To check without using the Internet, use the Repair-Volume -DriveLetter C -OfflineScanAndFix command.

Video: how to check a hard drive for errors

How to check the registry for errors

The Windows Registry is a complex database of the operating system that stores all settings, changes, information about the computer and installed programs. In the event of a registry error, the consequences can be very different: from blue screen when turned on and the system is completely inoperable to an unremovable shortcut and other trifles.

The most annoying feature of registry errors is their layering. One minor error in the registry can lead to several others, which will ultimately lead to sad consequences. This is why regularly scanning your registry for errors and fixing them early is extremely important to keep your computer running at top speed.

Via built-in

Windows 10 has a built-in utility for checking the integrity of the registry, but it is rather weak and does not find most errors. It is best to use one of third party programs which are described below.

Only critical errors can be fixed in this way: many registry malfunctions will remain untouched.

Open a command prompt as an administrator, type scanreg /fix and press Enter.

Enter the scanreg /fix command to check the registry through the built-in Windows 10 utility

Via CCleaner

CCleaner is the most popular and reliable computer cleaning program. It is designed to clean debris from hard-to-reach places that the system itself cannot reach. However, CCleaner deserved its popularity precisely for its registry cleaning function, which allows you to quickly find and overwrite registry errors without affecting anything important.

Via Glary Utilities

Glary Utilities is a very functional program that will run in the tray and keep your computer clean and tidy. Cleaning the registry is just one of the available features to improve your computer. Glary Utilities may seem intrusive to many, but for inexperienced users, it will be a very useful assistant.

Via Wise Registry Cleaner

Wise Registry Cleaner is a program designed not only to treat the registry, but to completely clean it from stale and unclaimed parameters. Cleaning the registry with Wise Registry Cleaner is quite serious and can hurt important files, which the program will seem superfluous. The first time you run Wise Registry Cleaner, you will be prompted to do backup registry, which is better to agree. If important files are affected, you can always roll back.

Wise Registry Cleaner is available only on the English version of the official website: when you change the page language to Russian, you will be offered another Wise Care 365 program.

Even if you don't see any errors on your computer, it's best to scan it periodically. This will keep your system running smoothly and help resolve most issues before they become noticeable.

Windows 10 at the time of its release had many problems that users had to deal with in a variety of ways. To get rid of them, the FixWin 10 utility was invented, which can very quickly get rid of errors in the system. The tool is free, does not take up much space and can be stored on a USB flash drive. Of course, it’s not a fact that she can cope with all the problems, but it’s worth a try.

FixWin does not have a Russian interface, but this does not prevent even a beginner from understanding the work. Although, what is there to understand if the program does everything automatically.

How to use Fix Win 10

You can download the utility from this site: http://www.thewindowsclub.com/downloading-fixwin-10.

Having launched the utility, on the screen we see that the window is divided into two parts. On the left are the items that we may need, and on the right are information about the system: OS name, processor and bit depth. The username is also included.

There are four options below, now I will explain what they are responsible for:

System File Checker Utility - a tool for checking system files;
Re-Register Store Apps - Reinstalling the system software;
Create Restore Point - Create restore points;
Repair Windows system Image - Recovery system components.

What are the options on the left side of the program window?

Welcome is the welcome window where we just saw the system information;
File Explorer- elimination of errors, explorer, desktop and other components.
Internet and Connectivity - fixing Internet problems;
Windows 10 - elimination of errors that most often occur in the system;
System Tools - troubleshooting basic Windows tools, such as command line, start menu and many other options;
Troubleshooters - fix errors when connecting devices or related programs;
Additional Fixes - getting rid of other Windows errors, as well as adding some components to the sections of the Start menu.

I have not listed all the features of the program, hoping that you will figure it out yourself. If you do not know how some of the menu items are translated, then use a translator.

By going to any of the sections on the left, many parameters will be displayed on the right that are responsible for fixing something in the system. Just click the "Fix" button to get rid of the error. Next to this button there is a question mark icon, clicking on which you will see background information to manually fix the problem.

FixWin Windows 10 tab

In this section, you will find a lot of options designed to "destroy" this or that error. Let's see what the program can do:

Using the DISM utility to fix component store issues;
Reset Windows settings(in the absence of a start);
Disabling the OneDrive program (if you don’t use it, you can delete it altogether);
Fix bugs Windows updates(for example, if updates are not installed or not searched);
and getting rid of problems with downloading applications;
Fixing issues related to Windows applications and error 0x8024001e;
Failure to launch software (correction of new and built-in).

The Internet & Connectivity tab contains the following options:

Fixing problems with Internet Explorer and context menu;
TCP / IP and Internet protocol errors;
and fixing DNS errors;
System update errors;
Problems with the firewall and its reset;
Reset Internet Explorer;
Correction of problems related to the process of using Internet Explorer;
Internet Explorer optimization;
Return of all Internet settings explorer;
Winsock recovery.

Steps Before Using FixWin 10

I think you should not immediately rely on the indicated tool, because it is not a fact that it will work, but resetting some settings implies that the parameters will have to be configured again. To get started, carry out a series of "activities", which are listed below.

Correcting Windows 10 errors after updating it is the most important drawback of this operating system. A multi-million user audience is faced with problems in the functioning of the new operating system after almost every update. Problems are associated with both the inoperability of any graphic elements, programs, and peripheral devices. In general, the list of problems is very large, we will not list them all.

To make life easier for Windows 10 fans, a tiny FixWin 10 utility has been developed that can quickly solve most of the known problems in the functioning of the new OS. Although there are versions of the program for previous Windows versions(7 and 8). Its tiny size, well-functioning, confirmation of effectiveness in practice and the absence of hidden functions distinguish the application from all similar software, even commercial and developed by fairly well-known software companies.

FixWin 10 is a small portable program for fixing Windows 10 errors. The utility is distributed free of charge as an archive. After downloading it, the compressed file should be unpacked to any directory. After launch executable file A window will appear with numerous tabs - menu items. What is sad, the utility interface is not translated into Russian, although not far from of English language and some experience in Windows setup It will not be difficult for 10 people to master the program.

Software functionality

The main window of FixWin 10 is informational. It displays information about the hardware of the user's computer and four icons for frequently used functions:

checking the integrity of system files;
initial registration of programs from Windows Store 10 if there are problems with them;
immediate creation of a system rollback point when the function is active (it is recommended to use this button before making changes to the system in order to avoid additional problems);
resuming system components using the dism.exe tool.

The left frame of the window is static. It contains the main menu of the application, made in the form of tabs. Each of them contains functions for automatically fixing problems with the system.

1. File Explorer - the section will allow you to solve problems that have arisen in the explorer (lack of autorun removable media, WerFault error, explorer crashes, problems with desktop rendering).

2. Internet & Connectivity - detects and fixes network problems (resets DNS, resets firewall settings).

3. Windows 10 - the section will help fix errors specific to the new OS.

4. System Tools - a section for solving problems with system tools (task manager does not start, system resume is disabled, access to the command line is denied by the administrator).

5. Troubleshooters - will allow you to identify problems in the functioning of certain applications and devices.

6. Additional Fixes - here are a lot of additional application functions, such as adding a hibernation button to Start, fixing problems with opening office documents after updating to "tens".

Interestingly, you can apply fixes not only through the program using the "Fix" button located on the right side of the window. By clicking on the icon with the "?" sign, you can see system command(sequence of actions), the execution of which will lead to a similar result.

What problems with Windows 10 FixWin10 will fix automatically

In the current section, we will consider the fixes collected in the third section of "Windows 10" in the order they were posted, which will make it easier to use the utility for people who are not familiar with English or do not speak it at all.

Recovery of damaged Windows storage 10 through the DISM tool.
Resetting the Settings application for the case when the All Settings window is not available or its launch is accompanied by an error.
Shutdown OneDrive storage if you do not use cloud services from Microsoft. The "Revert" button will activate the storage if necessary.
Fix problems if you can't open Start.
Troubleshooting when WiFi is intermittent or not working at all after a Windows 10 upgrade.
After installing the updates, the "ten" does not receive updates.
Delete the Windows 10 store cache if you have problems downloading apps from the store.
Fixing issue 0x8024001e when downloading apps from the store.
Re-registration of applications from the store in cases where they do not work.

And finally: you should download the program only from its official website. Before starting the downloaded archive, it is recommended to check it on Virustotal.

windows10i.ru

How to fix errors in Windows 10

≡ 21 July 2016 Rubric: Computer programs 7 143 Views

I will show you how to fix errors in Windows 10 using several programs as an example. The utilities described in the article do not need to be downloaded, they are already in the operating system and with their help it is easy to find a malfunction and fix it.

Windows 10 crashes occur periodically for everyone, there is no need to panic - you need to know what to do next.

Let's start in order...

Troubleshooting

This is the first thing that needs to be diagnosed. To do this, in the "Control Panel" go to "Troubleshooting".

Here you can check and make the necessary adjustment of the equipment. There is nothing difficult. And it is likely that the problem will be solved.

Resource Monitor Windows 10

A great tool in my opinion. It will be useful if you need to disable one or more Windows processes, which in one way or another load the system or behave strangely.

Resource Monitor offers comprehensive information about any driver, service, memory, process, network connections, and more.

System rollback

I never stop repeating to everyone, - Make a backup and restore points. It will make your life easier and save money on computer wizards!

An essential feature that many avoid. Either from laziness, or from ignorance.

Before you install the program, clean your computer, for example Ccleaner, create a backup copy! And take it as a rule!

Checking RAM

It is not uncommon that problems in the operation of a computer are associated with RAM. In this case, blue screens with a characteristic error number can often appear, frequent reboots of the operating system and applications that do not start ... Checking the RAM!

Backup copy

Do not forget about this useful option. There are many third party programs besides internal ones. One way or another, this will greatly help fix errors in Windows 10.

System Stability Monitor

Of course, in order to repair something, you first need to understand what is broken;) And the "Stability Monitor ..." can help with this.

Here you will be presented with a detailed report on errors, failures in the operation of applications and the OS. Even a novice user can quickly guess about the problem and understand how to fix errors in Windows 10.

xn--e1agaedegkgsq.xn--p1ai

Windows 10 error fixer

There are many programs on the network with which you can fix simple errors in the Windows 10 operating system. However, given that some applications work on a paid basis, we bring to your attention an overview of free programs to solve various tasks new operating system.

Also Read: Windows 10 Error Codes and Troubleshooting Methods

Microsoft Fix It Utility

Microsoft Fix It is one of the most famous programs for automatic search and bug fixes. Fully compatible with Windows 10. However, it should be noted that in December 2016 it was released Last update applications. Therefore, before downloading, check the relevance of the software version.

What fixes?

Problems in the work of the Explorer;
Windows Update errors;
Nutrition problems;
Errors with updating drivers and programs;
Problems with the connection and operation of devices.

How to use?

We start the program and select the topic of the problem.

Specify a subsection. For example, "Connecting to the Internet".
The search for the problem will start. After finding the problem, click "Fix".

This error fixer for Windows 10 is completely safe. However, a serous error cannot be corrected with its help.

If you do not want to fix Windows 10 errors using third-party programs, you can use the regular tool of the operating system itself. To do this, do the following:

We press "Start". In the search bar, enter "Troubleshooting".
A new window will open. Select "View all categories" from the menu on the left.

From the list, select the category of Windows 10 in which you have problems.

For example, select "Troubleshoot Compatibility Issues". We press "Next".

The search for problems will start.

An error report will then appear. Click "Next" to start fixing the problem.

As practice shows, this tool, although not always, but quite often helps to correct minor errors.

FixWin 10 - software for solving problems with Windows 10

Some Windows 10 error fixers just don't work because they're not compatible with the new one. operating system. FixWin 10 software is designed specifically for fixing Windows 10.

What fixes?

Errors in the Start menu and File Explorer;
Errors with the launch and operation of programs and games;
Restores system services;
Allows you to unlock the registry editor;
Fixes network connectivity issues.

The program does not require installation. Has an English interface.

How does it work?

We start the program. Select the main heading.

Specify the subcategory and click "Fix".

We are waiting for the program to determine and correct the error.

AVZ Utility

We have already used the AVZ utility more than once to fix various problems that we described in the articles. She is really very effective.

What fixes?

Problems with the connection and operation of the Internet;
System errors;
Allows you to unlock and access hosts file, task manager, registry editor and other system elements;
Restores standard settings systems;
Removes restrictions for a specific user.

How does it work?

We start the program. Select "System Restore".
A new window will open. We select a specific problem. We mark. Click "Perform the marked operations".

After using the utility, you should restart your PC.

Anvisoft PC Plus software

Anvisoft PC PLUS is designed to solve problems with Windows 8.1 and 10.

What decides?

Problems with installation, launch and operation of programs, games;
dll errors files;
Issues related to Registry Editor and Task Manager;
Blue screen of death solution.

How does it work?

We start the program. Select the desired section.

The search for problems will start. This may take several minutes. A list of errors will appear. Select the one you want and click "Fix now".

We are waiting for the program to fix the problem.

The program has an English menu. However, the software does not try to install third party applications, therefore, during installation, you should click "Next" and do not remove any marks.

Net Adapter Repair utility to fix network errors

This is a special program that allows you to fix problems related exclusively to the network. The software does not solve other problems.

How to use?

We start the program. Select the category you want from the menu on the left.

After solving the problem, you should restart your computer.

It is worth noting that there are many other programs on the network with which you can solve a particular problem on Windows 10. You can download some programs on our website under the heading System programs by selecting the desired sub-heading.

SoftikBox.com

Troubleshoot Windows 10 Critical Errors: Cortana App, Start Menu, KB 3081424 and KB 3081436

Upgrading to Windows 10 brought users not only new features, but also new challenges.

So, many have encountered errors that manifest themselves cyclic reboots computer or the failure of some system functions, such as the Start menu and the Cortana voice assistant.

What is the cause of these errors, Microsoft does not yet say, nor does it offer anything specific to solve them. However, ways to eliminate some of them have already been found.

Critical Start Menu and Cortana error in Windows 10 appears both after the update and after clean install partition formatting systems. Most often, it occurs immediately after loading, sometimes - after a few minutes.

The next time you sign in to Windows, everything repeats.

The cause of this error is associated with the modification system settings malware, but often it occurs on just installed Windows 10.

How to resolve the error

If the problem persists, run the Msconfig system configuration utility: click the search icon on the taskbar, type "msconfig.exe" into the "Windows Search" line, and open the application.
Go to the "Download" tab and check "No GUI" in the list of options. Now, at system startup, the animated Windows splash screen, but the error will disappear with it.

Restart your computer. After logging in again, open Msconfig again and on the General tab, check Selective Startup. In this case, there must be a label "Use original boot configuration".

Important! If after restarting Windows 10 critical error Cortana and Start appear again, it is recommended to disable Cortana (it is still useless for Russian-speaking users), and Start is reinstalled.

Disabling Cortana

Open the search by clicking on the magnifying glass icon on the taskbar, and enter the settings menu by clicking on the gear icon.
Toggle both sliders to Off.

Reinstalling the start menu

Get-AppXPackage -AllUsers | Foreach (Add-AppxPackage -DisableDevelopmentMode -Register “$($_.InstallLocation)\AppXManifest.xml”)

Windows Firewall is required for the basic Powershell instruction to run successfully.

If you are using a third-party firewall, pause it, then open the control panel, go to the "Windows Firewall" section, click on the "Turn the firewall on or off" menu and check "Enable".

After executing the commands, restart the explorer: open the "Processes" tab in the task manager, click on the explorer in the list of applications and click the "Restart" button.

The Start menu will open again, but this, unfortunately, will not get rid of the reappearance of the error. You will have to do this operation every time the start stops working.

Many users have a variety of problems related to the operation of the system - start or settings do not open, Wi-Fi does not work, applications from the Windows 10 store do not start or download. In general, everything that I do my releases about you could fix any Windows 10 errors.

To solve these problems, there is a program called Fix Win 10- this is free program, which allows you to fix many of these errors automatically, as well as solve other problems with Windows that are typical not only for latest version this OS.

Download this program You can from the official website of the developer "The Windows Club".

To download the program, scroll down the page with the mouse roller and find the button in the text "Download File" , click it and you will be redirected to the download page.

You don't have to press anything else! The download will start automatically after 5 seconds.

The program does not require installation on a computer: you can save it somewhere on your computer in case you ever have problems with the system: in fact, many of them can be fixed without too much searching for a solution.

Extract the program from the archive and run it as an administrator. Run as administrator- this is a prerequisite, otherwise the program will not work!

As you probably noticed, the main drawback of this program is the lack of the Russian interface language. But in this issue I will try to translate and tell you about all the points of this program to the best of my ability.

FixWin 10 program allows you to fix any Windows 10 errors

After starting FixWin 10, in the main window you will see basic information about the system, as well as buttons for launching 4 actions: checking system files, re-registering Windows 10 store applications (in case of problems with them), creating a restore point and restoring damaged components Windows using the DISM.exe utility.

Before starting work, I recommend that you definitely use the button "Create Restore Point"(Creating a restore point), in this case, you can return the computer to its original state, if suddenly something goes wrong and you want to cancel contributed by the program changes.

There are several sections on the left side of the program window., each containing automatic fixes for their respective bugs. First, let's take a brief look at each of these sections, and then we will analyze them in more detail.

File Explorer Section - contains typical explorer errors (the desktop does not start when entering Windows, WerMgr and WerFault errors, CD does not work, and DVD drive and others).
Section Internet and Connectivity - contains Internet and network connection errors (DNS and TCP / IP reset, firewall reset, Winsock reset, etc. Helps, for example, when pages in browsers do not open, while Skype is working normally at that time).
Windows partition 10 - contains errors typical for new version OS.
Under System Tools - there are errors that occur when starting Windows system tools, such as Task Manager, command line or registry editor, disabled restore points, resetting security settings to default settings, etc. These errors can occur if any system applications have been disabled by the system administrator.
In the Troubleshooters section - contains diagnostic start buttons Windows problems for specific devices and programs.
And the last section Additional Fixes - contains additional tools: such as adding hibernation to the start menu, fixing disabled notifications, internal error Windows Media Player, opening problems Office documents after upgrading to Windows 10

Important point: each fix can be launched not only using the program in automatic mode: by clicking on the question mark next to the "Fix" button, you can see information about what actions or commands can be used to do this manually (if this requires a command or PowerShell, then by double clicking you can copy it).

The name of the first error translates as − The trash can icon is missing from the desktop.(When you click the Fix button, this fix will restore the trash icon on your desktop that may have been removed by some program or some kind of virus. This will make minor changes to the registry.
The second mistake is Application error WerMgr.exe or WerFault.exe. The instruction accessed a memory that could not be read. Press the OK button to end the program. (This error may occur due to a problem with reporting Windows errors. Fix 1 will run diagnostics Windows memory, and Fix 2 will make changes to the registry and disable the WerSvc service.)
The third error translates as "Missing explorer options in the control panel, this could have been done by an administrator or malware." Fix button fixes given error.
Correction of the cart if its icon is not updated automatically (here it means that when the cart is empty, then its icon is an Empty Cart, but when there is something in it, the cart icon looks filled with pieces of paper. Fix and fix if there is such a mistake.
The desktop does not start (This Fix will help you in the following case: when you turn on the computer, you do not see anything but the wallpaper. The taskbar and others are not visible Windows components.)
Thumbnails not showing in File Explorer. (As you probably guessed, this means that the thumbnails of the images are not displayed, but instead the default icon is shown.
Reset cart. The cart is damaged. (This Fix will fix all problems related to the basket. However, everything in the basket will be removed from it.)
The CD/DVD drive is not recognized by Windows and other programs. This fix will help fix that.
An error called "Class not registered" in Explorer and IE. Fixed with this fix.
There is no item ""Show" in the properties of the folder hidden files, folders and drives "" It occurs mainly if someone accidentally messed up with the registry.

READ ALSO: How to install Desktop Gadgets in Windows 10?

The first error in this section translates to "Not working context menu in IE. (This fix fixes a bug Internet browser Explore when right-clicking doesn't open the context menu.)
The next error is “No internet connection. Problems with the TCP/IP protocol. (This fix will change the registry to reset the TCP/IP protocol.)
The following error, "Problems with DNS resolution", is fixed by clearing the DNS cache.
The next paragraph translates as "A long list of unsuccessful and installed updates". This fix allows you to clear the history of installed and not installed Windows updates.
The following fix allows you to solve problems related to the Windows firewall. Reset Configuration Windows Firewall.
Reset IE settings to default.
Runtime errors occur in Internet Explorer while surfing. (These errors can be caused if the website uses HTML code that is not compatible with this web browser.)
Next comes a fix to optimize IE for the maximum number of connections when downloading more than 2 files at the same time.
If the "Advanced" tab has disappeared in the properties of the Internet Explorer browser, then this fix will help solve this problem.
And the last paragraph translates as “Problems with the Internet connection? Repair Winsock (Directory Reset)." (This fix fixes dll library responsible for connecting to the Internet if it was damaged).

Issues with Windows Store components. (May occur after a Windows update). Solved by this fix.
Reset the settings of programs that are installed through the store and start with errors.
Shutdown OneDrive apps(The "Revert" button turns it back on).
The Start menu does not open or does not work in Windows 10. This fix fixes this.
Wi-Fi not working after upgrading to Windows Fix and fix.
Windows Update freezes while checking for updates. This fix will help fix that.
Problems with downloading applications through the Windows Store. The fix solves the problem by clearing and resetting the cache.
The app is not installed from the Windows Store. Error code: 0x8024001e. We fix and solve the problem.
Windows Store Apps won't open. All applications need to be re-registered. This fix solves this problem.

READ ALSO: How to delete non-removable files, folders and programs. Utility Unlocker!

The task manager has been disabled by the administrator and will not start (If you get the message "Task manager has been disabled by the administrator" when you start the task manager, then this fix will help you).
The command prompt has been disabled by the administrator and will not start. Similarly, as in the first case, this fix fixes this.
"The registry editor has been disabled by the administrator" and does not start.
Disabled editor group policy(gpedit.msc). (This fix includes this editor, and you can make your changes in it.)
Reset Windows Search to the default settings. This fix fixes issues related to Windows search functionality.
The following error translates as "The recovery system has been disabled by the administrator. Please refer to system administrator". This fix includes a recovery system
The device manager does not work correctly or does not show all devices. Corrected with this fix.
Defender recovery. Fix resets all settings Windows Defender to the default settings.
The notification and security panels do not work (This error means that Windows cannot detect the installed antivirus program. This may be due to the fact that the previous antivirus program was not removed correctly and some traces of it remained). Corrected with this fix.
Reset options Windows Security to the default settings.

This section contains buttons for starting diagnostics of various components of your computer. It does not make sense to translate it, so as not to delay the video. Moreover, if you click on any of the buttons, the diagnostic launch window will open already in Russian and you can read what diagnostics will be performed.